https://forum.hptuners.com/showthread.php?96757-Injector-Data-Repository
Type: Posts; User: blindsquirrel
https://forum.hptuners.com/showthread.php?96757-Injector-Data-Repository
If the replacement TCM is new-new and has never had any kind of flash before, HPT won't detect it. If it's a reman and still has some old file in it, or has a generic placeholder calibration, then...
This is what they look like with injectors or O2s bank-swapped
145573
0hz if the MAF is removed, 1hz if it is just failed temporarily for tuning VE. P0101/P0102/P0103 set to MIL on First Error. Engine > Airflow > Dynamic: Dynamic Airflow: High RPM Disable = something...
If you only need to program one or a few ECMs it's easier/cheaper to just buy them used and pre-programmed to a VIN you supply.
First, find a file in the repository with the stuff you need. Take...
My oil pressure gauge has a needle that will sweep the full range and everything like a real gauge but in use it only has two positions, zero or 40psi.
At least I think I understand the reasoning behind exceeding the max on that one, it changes the shape leading up to/after the peak and the dwell time at 194F, even if the value the ECM uses never...
Every cell that got populated in the trims error chart is lean in that log, MAF Fail is = 100hz, P0101-103 are set to No MIL instead of First Error...
So the file needs to be set up by someone...
Prove you are human: How many forward gears does a 4L60E transmission have?
This happens in other tables as well, depending on year/platform.
145534
145532
In da picture...
So if 0->1 is "44" (whatever that means, for now), then at 43/199.4F it will be still off, at 45/203.0F it will be on, and the actual switchpoint will be somewhere...
Seems like it would also be pretty easy to test yourself, by logging all the related stuff.
You can't write the truck's stock file back to it if the only file you have is one that was made after the old trans was gone. You'd need to have read it out while the old trans was still in it.
145528 145529
145530
These look... similar. But different enough to maybe make a difference. The EGR valves look identical but are different part numbers, I don't know what is different between...
If O2s or injectors are swapped bank-to-bank it creates a feedback loop. As long as everything is good, everything is good. But if either side starts to go away from zero then it just keeps going...
https://forum.hptuners.com/showthread.php?79508-Overheat-protection&p=577551&viewfull=1#post577551
145527
https://www.ebay.com/itm/274424906026
https://www.ebay.com/itm/132370243894
https://www.ebay.com/itm/335330445308
The file you've already read out of it is everything that will ever come out, that is 'your file'.
CTRL+L, find one from before you made the change, right-click & Open in New Editor and save.
What I mean is, what file would you write to it other than the one you already have?
Nuh uh.
145505
Code is not in the manual for 2002 Astro.
145506
There are two TP sensors and two (sometimes three) pedal sensors. The multiple sensors have different voltage ranges and sometimes sweep directions so they can be used as rationality checks for the...
The info in the logs (can't see the tune file, because it wasn't posted) shows as 2004 Sierra LM7. Application matters on these things. I mean, if you want the stuff to work like it's supposed to.
...
Looking at the third log, if you have new upstream O2s why do you have pending heater circuit codes for both banks? P0135 & P0155. Did you use sensors looked up for whatever the year/make/model the...