Watching the short term and long term fuel trim. I would say the car is lean when you first fire it up
Type: Posts; User: cmcmanus2
Watching the short term and long term fuel trim. I would say the car is lean when you first fire it up
which table do i need to add fuel to get my car to start in 20 ish degree weather? should i work with the main ve table first or the cold start first. The car has been dohc swapped and has the ford...
I bought a blown up 00 gt The block is a 98 teksid, heads are off a 99 Lincoln, intake is a off a 04 mach 1. i can't find which exact injectors i have . The sku is 0280158279 the bottom number is...
when i switched my mustang over, the car cranked and fired up the first time. Next time i went to every thing lit up and it wouldn't even attempt to do anything. I beat my head for awhile and started...
So after a ton of searching online I believe I have the bosch ev14 52Lb injectors. The car is a 00 mustang gt with a 98 dohc teksid block, 99 continental heads and a 03/04 style mach 1 intake. I...
I'm trying to tune my 00 gt, Do Any of your PIDs or histograms populate? The only one on my car that will populate is my A/F gauge but it doesn't run through my mpvi2.
im using the oo gt pcm, thanks!
I just finished swapping my 00 mustang gt to a dohc engine. 98 teksid block with 99 contiental heads. The Intake is a mach 1. I go to dig into tuning the engine and realize this isn't going to be...
IDK man nothing was working, then lambda wanted 1.8. which satisfied the computer, but the gauge made it run pig rich. Hp tuners isn't working right, so I'm pretty frustrated right at the moment!
I used a 6.0 VE table. As far as adding 80 percent of fuel, I was following the the example set from goat rope garage. The readout on my computer showed that the truck was running 1.80 lean. I used...
Ok so it turns out that I did not clear the LTFT and I didn't have my secondary VE matching my primary. So thanks for the advice. I multiplied my MAF table and my primary and secondary VE tables by...
I swapped a 03 lq4 into my 99 silverado, the truck had a 5.3 from factory. I'm using a 4110 aem wideband gauge. I'm relatively new to tuning so I have been watching videos on youtube from goat rope...