Thanks for the reply. If you can view my tune VE tables, do they look "normal" for lsj?
I'll keep tuning. I want to get things smooth and normalized as I want to add a TVS for more HP. At that...
Type: Posts; User: blackred
Thanks for the reply. If you can view my tune VE tables, do they look "normal" for lsj?
I'll keep tuning. I want to get things smooth and normalized as I want to add a TVS for more HP. At that...
Bump for some advise
So it's been a while and finally back home and have been tuning in the mornings on way to work. I tuned VE tables first with the new filtering formulas in. It's definitely smoother, but I also...
This is my formula: [50090.156.slope(10)]>0 AND [50090.156.slope(10)] <8 AND [50070.56.slope(10)] >0 AND [50070.56.slope(10)] <200
Loading VE logs this definitely cuts down on aberrant data. If...
Ok, I'll give it a shot. Unfortunately heading out of town for another week, then I hope to fine tune this.
I'm assuming I can string along the RPM and TPS filters with AND in between. I'm not...
Would you be willing to share what filtering formulas that you would use for VE, MAF and PE tuning?
I get you on the coastdown and fueling. I don't know if it's an issue, or one that can be...
Are you referring to the fuel injector control section in the tune?
I'm running ID1000 injectors and have all the tables in spreadsheet provided by them specific for our cars. I'm running a DW300...
No worries. Im working on MAF and PE tuning for a bit. I have to go out of town for another week, then I can hopefully get things dialed in. Let me know what you think when you have a second to...
Sounds like a plan.
I know most people on the lsj platform tend to MAF only. Definitely wouldn't hurt to do VE at idle or low RPM. Did you happen to look at the VE table? Are the spikes seen...
Well, assuming I set everything up right, and I think I did, do you see anything glaringly wrong with the MAF tune in process as is?
Ok, you'll need to help clarify things for a newbie like me. I was messing with layouts and so I did have some erroneous junk in there. I have added an external sensor WB. I have the AEM 30-4110...
Got back in town and have tried to adjust and log some things.
1. Deleted one of the WB channels
2. Only kept commanded lamda
3. I think I added what you were asking in logging air mass in...
Will do. It will be a week out now. Leaving for vacation. When I get back I'll log and post results. Thanks
cobaltssoverbooster, I watched your lsj tuning videos, great by the way!!!, if you have any time, would you be able to look at my VE tune and any future tune to give any recommendations for a noob? ...
Yeah, I've read the P12 ECM is only partially available.
Is there any range put in dynamic airflow to allow VE to run idle if that is better, or just shut off and MAF only?
Would also be nice...
Ok, I have been VE tuning this week and have logged idle and cruise logs up to 4000RPM. My thought is I want to tune the VE as best I can as a failsafe, but plan on MAF tune only. Would someone be...
Ill give it a shot. Thanks
Perfect. Yeah, that was my plan was to do a summer and winter tune. I was having cold start up issues on the winter tune, but never really had time to mess with it, plus the clutch went out and I...
I have an 04 Saturn Ion Redline running E85. Full mods with 2.8 pulley. Last winter I tuned it and fuel was 74% ETOH (not flex fuel capable). Im running DW300 fuel pump with Fuellab BRFPS with...
I have an 04 Saturn Ion Redline running E85. Full mods with 2.8 pulley. Last winter I tuned it and fuel was 74% ETOH (not flex fuel capable). Im running DW300 fuel pump with Fuellab BRFPS with...