Search:

I figured because the ECU was relatively similar to the rest (and had heard that they are similar on here and elsewhere), if support for this vehicle could be added? Please find the bin file...

Also I noticed that the 4 torque/load calc tables are swapped. 1a and 1b, 2a and 2b. A and b should be linked. But 1a is linked to 2b. The layout is somewhat different on this one. Kept throwing me...

So I've tuned a number of these things over the last couple years and I had a 2018 Q50 3.0 twin turbo AWD come by for a tune earlier I noticed there was a lot of tables missing. Like I don't even see...

Well I managed to figure out what it was and since nobody else decided to respond all and post my findings here The problem was no FEPS voltage on pin 13 if the dlc. No considering not that many...

And I'm sorry I was using speech to text cuz I was in a hurry but I think you guys get the gist of it. Lol

Yeah so as the title states my client has a 2006 Mustang GT that him and his buddy just installed a cam into. The vehicle is running fine before they started the install but of course now we get a...

Trifecta has an article on their blog about their experience with tuning that particular cam for the LUJ and the LUV. Just go to the website. It's in their blog. I just read it the other day and it...

Well I'll tell you right now it's not on all of them. This is the first time I ran into an issue where the headlights caused that type of problem and this one was actually 100% bone stock. It may...

I'm having the same issue with a client that has a 6.0 running an e38 out of a Silverado. Engine transmission are both from a 2008 Silverado and the transmission is a 4L80E. He got a custom wiring...

This is an old thread, but I feel it's worth noting.

I am tuning a 2019 Q50 twin turbo, and the headlights were causing this issue. So, make sure the headlights are off. It worked as soon as I...

So this vehicle is a 2014 stingray with an lt4 supercharger on it that has been ported, fitted with a 103mm (i think) TB, full catless exhaust, long tube headers, x-pipe.

It is running a flex...

So the third temp sensor in the supercharger manifold pressure sensor that's mandatory because I've seen other people run it a number of times where they're just running a barrel sensor and they're...

That's what I did do. I pulled the the barometric pressure sensor wire from the mass air flow sensor cuz you don't want to have heavy vacuum on that you want to read actual barometric pressure not...

I have the same problem and it turned out to be that we accidentally had a one bar map sensor on the back of the supercharger. So every time we get anywhere near or over like 101 kPa it would just...

So, we have the LT4 map installed in the back of the SC, and the stock MAP being used for Baro.

And thanks! I will try those. In terms of going SCIAP, what exactly would require more work?

I...

FOr the record, just know that an e78 from say, anywhere in south-east Asia, can be RADICALLY different than a US one. Hopefully you got what you need.

So I got the thing running well. Just now trying to fight the timing. Part throttle knock is gone after tuning vve and MAF. But wot it will see a bunch. I pulled hella timing and even switched to...

Just an update. Everything is installed and working great. Kept the baron in the maf for now and am going to break it out with the old map from the LT1. She actually runs great. I'm going to go tune...

So I just put in a support ticket last night. Most people can't get tuned during the week they have to do it during the weekend so of course this is the fourth time this has happened where somebody...

So I figured out most of the issues I got the car idling. First off had nothing to do with the throttle body relearn. It is the max throttle table that was set to something below 100% so I just...

For this setup, what makes more sense to increase first to get it to idle? I started last night with increasing the VT and VVE by 10% each, then flashing and attempting to start. The second time I...

No it's not. I'm in the client went ahead and asked for a refund anyway so I can't really do anything about it now. But he's saying that it had never been tuned before and it looked Factory like...

So I have a client and from what I gather my mpvi too and the version I've been using for HP tuners and the beta version for HP tuners either one should support this vehicle. But when I go to...

May I suggest some things? I've been tuning the Cruze for like 4 or 5 years now consistently. I may be able to shed some light or ateast my experience.



No. Don't do that at all. So it's not...

Bump...

So I remember reading that HPT has had beta support as far back as 2014 for these ECUs. I cannot pull a read and have a definition, as Editor throws a fit.

Does anyone know HOW the eff...