To fix this set ECM 1995 to off. (throttle est torque).
Type: Posts; User: tris909
To fix this set ECM 1995 to off. (throttle est torque).
nothing??????
got hot start a little better' but wont start nicely when cold. wont idle above 600 rpm for some reason. any help or guidance would be appreciated, i just cant seen to get this sorted.
hi all,
i am having issues with a hard start when hot situation with a 2021 1500 Ram.
Vehicle has Eaton TVS2650, long tubes, and cam (218/228 114lsa @ .600 lift). phaser limiter installed.
car...
tried the files attached, adjusted a bit in the tcm, but the engine file caused massive amounts of KR, up to 10degrees at light throttle all the way through to 4,000rpm
i have attached the file that...
Thank you.
great thankyou.
we were hitting map limits which we were be able to overcome, was throwing the the dreaded P2172 sudden high airflow.
i have fueling around 10.8 AFR on boost right through the rev...
started up great thanks heaps for the help.
i am very familiar with the GM platform (lsa) regarding ignition timing, but was just wondering what you would class as acceptable safe timing at WOT for...
running 80mm pulley.
full exhaust with extractors.
i was just looking for some help with inputting the data for injectors and MAP into the correct tables to get the vehicle running.
Hi all.
I was just wondering if anyone could help provide some assistance/data for the following setup we are working on.
The vehicle is a 2022 Dodge Ram Etorque that has been converted to non-EV....
129592129593
checked all pins which are all good.
129558
Hi all,
I have been having issues for several weeks now with a 22 Dodge Ram 1500 Etorque with first initial startup.
the back story goes as follows.
we have deleted the Generator and 48V battery...
hello all,
i have recently purchased a 2015 Volvo XC60 T6 polestar.
i was wondering what software people are using to tune or gain access to the pcm of these?
i believe it is a denso operating...
hello all,
would any one have a stock 2.8 liter diesel Toyota Hilux file?
thank you
what vehicle/operating system?
yes 2018 3.2 auto
hi all,
i have a quick question in regards to tuning 2018 3.2 ford ranger.
i am a bit cautious after seeing "brickable" in the flash window, is this writing an entire file or just a section/patch...
non dpf use 208 as far as i am aware.
i am using innovate LM2 wideband with there own sniffer pipe unit, still only using an LSU 4.2 sensor.
the LM2 can be calibrated for diesel, as i am sure the...
PX2 with SID 208, so being manual also of this era it has no DPF.
raising the torque limits i think improved the economy drastically.
Drilling hole into dump pipe and putting pyro in the hole,...
awesome thanks for the feedback.
i am going to spend the day with the vehicle this coming saturday.
i will post some logs and the final tune with feedback.
Great thanks heaps for the reply and direction.
i am going to be back at this vehicle in the next week or so. i will defiantly post up before, progress and after logs and files.
Hello all,
i am by all means not looking for a free ride here but more looking for someone with experience tuning diesels.
i have tuned hundreds of LS and Ford stuff but never really touched much...
South Gippsland, Victoria, Australia.