Search:

I'm tuning a 2018 gladiator with a hell cat motor installed. I read it and licensed but fail on loading it. I would assume the is because of I have no smart access cable. I thought you could not read...

Think your correct on the dodge stuff, it will be centerline angel and you can log that. Moving it in the wot on the dyno also show it respond to it as centerline. Being able to lengthen the torque...

Thanks Bill for the help. Your team has been great to us BTW!:burnout:

Could I just get a sensor and run 5volt though 2 amp fuse through sensor then to mpvi? Plus grounding. Using a aem sensor I could use your predefined numbers? That would make it so no need to...

Sorry didn't think it would matter. They are logging a 2014 srt jeep and using a innovate boost gauge. Innovate said no way to send output to HPT. I thought about just taking a voltage reading off...

Have someone with a map sensor locked and can not get a real boost log. Was seeing if any of you have a boost senor that is recommended for easy install that HPT will read. I am not close to the...

Not sure but sounds like that may be one of the valve body we use and have developed. The TCM Tuning will tame that to a stock feel and still give you much more clamping force on the clutches than...

This was hard to find being no codes and not sure where to start at. Logged some runs with a snap on scanner and then looked back at the data. The saved data from snap-on had more info then when...

Thanks for the hint on voltage. One volt did a lot on this jeep. We tested it before removing the smaller pulley and seemed to work. May test this out on a different jeep. Hope having the 02 sensor...

Idle run time adders, base idle, and throttle body airflow are things that may be worth looking at.

Thanks for those who was helping Ron with this project. I spent most of my weekend playing with this car. Making sure I can get the main issue to happen when I try. Re did the tune completely the way...

Sure passing the blame on me LOL. Flywheel gets lock tight and torqued twice then smiley faces get drawn around the bolt to mark they have been torqued. So that should be fine. I did leave .020...

Have done a lot of Hemis with shorter strokes than the 4.080 and have not had knock voltage patterns like this. This is the third larger stroker that has shown close to the same voltage pattern that...

Tuning a VVT low compression boosted stroker and it showed knock voltage at low timing degrees at starting point of my tuning this motor. Took timing away and it showed less knock voltage. Added...

Don't forget how important timing is.

I have not got my HP tuner yet so don't know what is adjustable. But I have done tuning on dodge and there maybe a max timing table to change. If your not seeing knox

Been watching progress for almost a year, seems grim are you still working hard on it or just working. Not trying to upset anyone, would like to know if I should move on. Is there a chance that this...