i cant get my wideband to pick up on the scanner but here is a new log and the wideband is reading in the high 20s122523
Type: Posts; User: Josh5.0
i cant get my wideband to pick up on the scanner but here is a new log and the wideband is reading in the high 20s122523
ok i have a wideband and an aem afr meter i will get it put in tomorrow. i appreciate your time
when they did the stand alone harness they cut out the driver side o2 sensor
i dont know what the fuel pressure is currently but it was 58#s when we installed the new pump and tank the exhaust is ran to the mufflers but nothing after the mufflers
Here is the log i just pulled on the truck this is with everything hooked back up122462122462
sorry i had my o2 unplugged on that log if i load the factory tune in it it takes throttle better than this revised tune that i uploaded on here that i paid a guy to tune it here is the other log i...
yes it will start and idle now but as soon as you hit the throttle it cuts out. here is a log i pulled on it122460
I have ls swapped my c10 that has a stand alone harness i put a btr stage 3 truck cam in it with a 2800 stall. I got it to idle after i put a new mass airflow sensor but i cant get it to take any...
Here is the Stock Tune File.
Thanks
Yeah that?s what I was thinking when I bought it lol just my luck
It has the 8 speed trans
I have a 2016 Denali with the 5.3 and need a tune to compare my factory tune too. I?m new to the gm stuff and just need one to build off of. Any help would be appreciated. Thanks