Apologies for resurrecting this thread again, but I'm having the exact same issues after a 4l80e swap and it's driving me nuts. Had anyone found a real solution?
Segment swap again, new os, new ecm...
Type: Posts; User: chaingun427
Apologies for resurrecting this thread again, but I'm having the exact same issues after a 4l80e swap and it's driving me nuts. Had anyone found a real solution?
Segment swap again, new os, new ecm...
With the repo all but gone, I've got nowhere to look for a base tune for a couple projects.
The first:
04 p59
gen 3 6.0 bored to a 6.2
Summit stage 2 truck cam
Gm 50lb truck injectors
Nnbs...
Any plans to restore all the custom tunes back to the repo? Or hand them off to somebody else to privately host?
I'm looking for a way, if possible, to convert a gen4 tune from an e38/e67 on an l96 6.2L to an e40 gen3 ecm, with an LS9 cam. I've had my lq9 bored out and it's being rebuilt, but i still need to...
You've got your input and output speed sensor swapped for one
second you need to adjust the fuel gauge based on an express van tune, here's my 98 tahoe with the modification already done.
Bump, would like to get this pcm sent back if anybody has any ideas
Did a tune for a swap in to a 97 c1500, manual transmission
Tire size 245/65/17 29.5"
Ratio 3.42
NV3500 2wd
should be 40.000/revolution from the vss, and 4000ppm output to the speedometer. (i...
I can't seem to find any information on the difference in the cam position sensor reading from an ls2 vs an LS4.
I'm trying to use the LS4 accessories on the LS2, but because of the water pump,...
Oh no, i'm not going to be tuning it to correct the issue, and the mechanical testing will come this weekend when i get a second, i'm wanting to correlate what i find there, with what i'm seeing in...
So, i'm a complete noob at tuning. so i'm using my 2001 suburban with poor mileage to learn more about how the maf, o2's and such interact with each other.
Some details, this is a bone stock 2001...
ground the low pressure switch input to the ecm, and give the ecm 12v to the AC request when the compressor is running, similar to the way the old TBI systems worked.
you could also probably...
Is it in any way possible to change the values that the PCM and TAC module expect to see from an APP sensor? I know the earlier drive by wire system have three app sensors, but i recently found out...
So, this one is gonna sound like I'm crazy. But if they were all to be Vin matched by a dealer with a tech 2, could an E40 ecm play nice with an 05-06 Silverado cluster, bcm and radio?
Long story...
Thanks Bill! I haven't been able to find that page since the new site went live. Much appreciated
I'm trying to wrap my head around how the upgrade system works. I've got a standard interface a with 18 gm credits spent. I want to eventually unlock all of gen 3, and the guy I bought it from said...
thanks orange! that's excellent
working on tuning my lq9, it's been modified before i go the software and i'd like to get an untouched file for an 0411 to compare with. with the repo down, i'm hoping that someone can help. email is...
actually ended up doing a vintage air trinary switch on this one, removed the ecm from the equation except for idle control
I'm currently building a harness for a 98 k2500, gen 3 express van and a P59 ecm. it will be running a sanden a/c compressor
what i'm mostly interested in, is how the AC is controlled with a...
Hello all, new to the forums and tuning in general. I'm going to be borrowing an interface from a friend if I can't find a used one to buy for myself.
Not sure if it's allowed here but if anyone...