ok this makes a lot sense and thank you for responding. I have read that 16' and 17' E92 files will not allow vin change and 17's have E92A-not sure if that matters . So if I use vin lets say from...
Type: Posts; User: kras007
ok this makes a lot sense and thank you for responding. I have read that 16' and 17' E92 files will not allow vin change and 17's have E92A-not sure if that matters . So if I use vin lets say from...
2014 GMC Sierra original L83 w/ 6L80. Just swapped in TR6060 and having trouble building ECM file for a manual configuration. I have performed successful manual swaps in Caprice PPV and Gen 5 Camaros...
2014 GMC Sierra original L83 w/ 6L80. Just swapped in TR6060 and having trouble building ECM file for a manual configuration. I have performed successful manual swaps in Caprice PPV and Gen 5...
attached is the original 02' z06 file and the start up file I created for initial start up. If anybody can take a peak and let me know if you have any other suggestions
just built and swapped in a LS3 into a 02 C5 Z06 vette. Crank has 24x reluctor, forged pistons and rods, flotek heads, BTR stage 3 LS3 camshaft, stock LS3 intake manifold, injectors, and throttle...
9050890509Here is scan and tune file prior to switching over to manual file knock sensor settings. You can see how much more severe knock was and the differences between the knock sensor settings. ...
This car was originally automatic and I just converted to manual. I compared knock settings from a file of a manual transmission Camaro same year against my knock settings which are from automatic...
Having some very high knock counts while trying to perform WOT tuning that I can not figure out after days of trying everything. I attached tune file and scans. Hoping another set of eyes might see...
I converted a 2011 Chevrolet Caprice PPV from automatic to manual transmission. I need to segment swap the ECM files so it properly is configured for the transmission change. This should enable me...