If I added a new cam with a 38% fuel lobe would I just take the stock fuel pump leading edge angle axis and multiple it by 1.38? Would I do this for the other tables too? (6994, 6995) ?
Type: Posts; User: Brianw36
If I added a new cam with a 38% fuel lobe would I just take the stock fuel pump leading edge angle axis and multiple it by 1.38? Would I do this for the other tables too? (6994, 6995) ?
Thank you for the information.
I must have stumbled across a trade secret or I'm asking a very dumb question. I have this question posted on various forums and with hundreds of views but not a single comment.
Can you list all the tables for a 2016 Camaro SS? Also does all the axis information need to match each table in the FSCM and ECM? SEe attached picture.
I am going over my tune and there are a few redundant tables between the ECM and FPCM in a 2016 Camaro SS. Should these tables match each other completely? Including axis information? The tables...
"Gonna take car into my tuner on Tuesday to see if he can address the high-side drop. DSX was no help. Dave says he has seen this before (high side drop when aux pumps kicks in) but no idea how to...
Are you talking about turning on the aux fuel pump at 14psi? I only make around 11-12 psi. Or are you talking about something else?
I'm having an issue where the aux pump kicks in and then my high side rail pressure falls significantly and then comes back up. I have adjusted pressures as suggested in this thread. I have lt4...
I'm interested in looking at some logs from guys who are running ProCharger setups on their SS Camaro. I'm not looking for a tune, just some WOT pulls. I'm interested in fuel pump pressure, rail...
Has anyone else dealt with this issue? Is there a fix for this?
What did you find was the issue?
I have this issue with a 2016 camaro ss. My speed limits are not maxed out. What values did you put back to stock? This rep dummy light is so annoying. Nothing is reduced just a light. Mine has...
Anyone have any other insight. It is so random.
This thing is driving me crazy. If anyone knows a fix please share.
I have it already set to 8000. Not sure if increasing it anymore will help. What was yours before you bumped it up?
I also sent you my current tune. Hopefully you can figure out my issue.
I checked in the tune and I don't have the speed limiter maxed out. Not sure if you actually looked at the tune.
The tune is attached in the first post. Hopefully you can figure it out.
There are none.
No
I have a 2016 Camaro 2SS that has been tuned that will show a reduced engine power display after startup. However, the car runs fine and doesn't seem to affect anything. I checked speed maxes and...
Where is the other thread you found? I'm interested in what you found.
Does anyone know if there is a field that controls when the variable oil pressure on a 2016 Camaro SS is activated/deactivated? When I start the car up it will go to around 60's psi and I let the...
I have a similar issue with a 2016 Camaro 2SS A8. I have submitted a service ticket but I have not heard anything back. You might want to do the same thing. The more information they get the...
I have flashed my 2016 Camaro A8 6.2 with the beta software for a while now. I have noticed that the oil pressure guage now shows a higher reading. I then noticed that when the car is off I'm...