Search:

Type: Posts; User: Spawne32

Page 1 of 4 1 2 3 4

Search: Search took 0.00 seconds.

  1. wanted to bump this and find out if ZF6 support...

    wanted to bump this and find out if ZF6 support had been added yet for Audi, particular 2009+
  2. Replies
    51
    Views
    9,050

    unfortunately i already have eurodyne and its...

    unfortunately i already have eurodyne and its absolute trash, was hoping for a better alternative
  3. Replies
    13
    Views
    1,949

    Far as I have been able to tell, the Audi A4 is...

    Far as I have been able to tell, the Audi A4 is NOT supported as of yet despite being listed. No one here has been able to get MPVI2 to read any of the 09+ A4's ECU's of the half dozen or so I have...
  4. HPT support never got back to me regarding it not...

    HPT support never got back to me regarding it not recognizing the ECU, but you can shoot me a pm if you want with more details.
  5. Unsupported controller, failure to load flash data, 09 Audi A4 Quattro

    Any ideas here?

    http://i65.tinypic.com/10f2o0g.png
  6. edit: sent the infolog data over

    edit: sent the infolog data over
  7. Will we see ZF6 support anytime in the next year?

    I know that they already released the ZF8 support, and I've seen how it looks so far from other people who have just gotten in to it, however Audi's for the most part before 2012 are mostly ZF6 and...
  8. Replies
    51
    Views
    9,050

    Won't buy a MPVI2 until I am certain that it...

    Won't buy a MPVI2 until I am certain that it works for my car. All I was able to pull was this under gather data.

    http://i66.tinypic.com/2wreptt.png
  9. Replies
    51
    Views
    9,050

    It specifies the ECU but that doesnt tell us what...

    It specifies the ECU but that doesnt tell us what year A4's are supported.
  10. Replies
    51
    Views
    9,050

    Audi/VW support

    Was told that there is going to be Audi/VW support for the MPVI2 interface? Do we know what models/years yet? Transmission tuning? Was wondering specifically about the 09+ Audi A4 with ZF 6HP28 and...
  11. Replies
    7
    Views
    2,439

    did you actually have to hit the areas you...

    did you actually have to hit the areas you modified? i just had the car out for about a half hour, didnt have any issues, but i didnt really hit the 48%+ areas.
  12. Replies
    7
    Views
    2,439

    I tried two different settings, the one I posted...

    I tried two different settings, the one I posted above, which worked initially but began acting strangely once the car shifted into 3rd or 4th. I would go from having a very touchy pedal, to almost...
  13. According to the post i read from chris from a...

    According to the post i read from chris from a while back, on the 06+ ECU's such as the E38 and E67, the way the desired throttle area works is different in the TAC module vs what the gen 3's had. He...
  14. Replies
    7
    Views
    2,439

    hesitant to touch desired throttle area

    Upgraded from a 78mm to 90mm DBW throttle body, since the throttle body is so much larger, i find myself using areas of the pedal that I never was in before, very low pedal position %'s. These areas...
  15. Replies
    94
    Views
    28,802

    If the throttle body itself is acting funny, i...

    If the throttle body itself is acting funny, i would either inspect the connector for faulty wiring (sometimes the copper can be broken inside the rubber insulator, or loose connections at the pin....
  16. Replies
    94
    Views
    28,802

    I had to send my tune file to them and they sent...

    I had to send my tune file to them and they sent it back to me modified.
  17. Replies
    94
    Views
    28,802

    Just wanted to let everyone know, I received a...

    Just wanted to let everyone know, I received a copy of the beta from support, changed the limits to 40% for P1516 and P2101 and the problem was solved!
  18. Replies
    94
    Views
    28,802

    another question for you all, when you get the...

    another question for you all, when you get the P1516 code are you getting P2101 as well?

    P1516
    The indicated throttle position does not match the predicted throttle position for more than 0.5...
  19. Replies
    94
    Views
    28,802

    Do all of these issues people keep having seem to...

    Do all of these issues people keep having seem to coincide after going WOT?
  20. Replies
    94
    Views
    28,802

    I was directed to this thread, im having issues...

    I was directed to this thread, im having issues with P2101 and P1516 after doing a LS3 (gold blade) throttle body swap (8 pin to 6 pin) on a LS4 car with a stock 78mm 8 pin "truck throttlebody". It's...
  21. reduced engine pwr and P2101 P1516 after LS3 throttle body swap

    Did a LS4 to LS3 throttle body swap using the pinout shown below. Driving at part throttle the car drives fine, but when you go 100% and release, the throttle gets stuck and throws the codes. It...
  22. Replies
    0
    Views
    582

    P0101 after LS7 MAF swap

    In the process of tuning an LS4 that has an LS7 maf swap with an LS1 intake and injector conversion. Upon startup it keeps throwing P0101 even though the MAF is functioning normally. The IAT has been...
  23. figured it out, has to do with windows 10 custom...

    figured it out, has to do with windows 10 custom scaling for smaller screens, i use it to make things larger because of the smaller screen and higher resolution. If you guys could adapt this that...
  24. That is windows 10, fully updated. Ill play with...

    That is windows 10, fully updated. Ill play with the windows DPI settings see if anything improves.
  25. HPT 3.0 display issues on small screens and no cylinder power balance test?

    I use an 11" dell inspiron to tune with and been so for years on 2.24, honesty not particularly happy with the changes in 3.0, the layout is a little better but it displays poorly and I had to manual...
Results 1 to 25 of 88
Page 1 of 4 1 2 3 4