Hello,
Have an 18 Challenger with an Edelbrock 2650, built bottom end, cam, ID1050 Injectors. Car ran great but needed more fuel pump. If you look in my tune you will see I added a ton of fuel...
Type: Posts; User: Blue-Z
Hello,
Have an 18 Challenger with an Edelbrock 2650, built bottom end, cam, ID1050 Injectors. Car ran great but needed more fuel pump. If you look in my tune you will see I added a ton of fuel...
Thank you
Anyone have a stock tune file for a 2018 challenger, 6.4L with automatic trans? Search repository with no luck. Any help would be appreciated! Thank You, Dave
Fixed. Please delete
Thanks for the pic also. I didn?t look at the engine tune too much, car was tuned by a ?well known? tuner, that MAF table is beautiful. 🙄 Should have looked this over better and gotten the whole...
Thank you for the reply. Confirmed fluid level. I agree on fueling and timing, car is on 109octane unleaded but still aggressive on the timing. I was just trying to get the trans dialed in and...
Hello,
Customer car came in for a trans tune, engine tune was done elsewhere, car is a 5.0 with a centrifical blower and a Circle D converter. Car had major shift flare and soft shifts with it...
Thank you very much!!! Greatly appreciated!!!!!
Tune and log posted in first post, thanks!
2006 Z06, pretty big cam and headers, car will go into closed loop and then come back out of closed loop for a bit and then back in. Sometimes it will fall out several times before staying in closed...
Hi all,
Im working on a LS swapped vehicle using a 2000 Corvette LS1, drive by wire throttle control, 6 sped manual trans, using the stock 2000 corvette computer. Car starts and runs, no issues...
Thanks. I know you need to drive a bit, that's why I didn't want to turn some stuff off and drive and drive with nothing happening! Thanks a lot, Ill probable just try this route.
Thank you! Ill give it a shot.
Bumping this back up, any other opinions on this? ThNks!
Thank you for the info. Anyone have any input on monitor setting on the NGC4 pcm?
Hi,
Have a 2008 Jeep SRT8 with longtubes and high flow cats. Having the typical CEL for cat efficiency codes. In IL we have emissions testing so I cant disable the rear sensors. If I uncheck...
In my situation, truck had a lost communication code with module. Cleared it with scanner and no more issues.
Thank you. The speed limiter was not modified in the tune.
Don't notice any loss of power steering but who knows. I'll try and read the chassis codes with another scanner. Just ironic it happened after flash.
Bumping this back up. Anyone find a solution? Just tuned a 2017 and it's been on ever since first flash.
Yea OEM injectors would be nice, problem is the later models are shorties and plug is different!
Any one else have recommendations? I'm going to look at Fuel Injector Clinic...
What are you all using for injectors with proper data? On mild setups where really large injectors aren't needed, I used to run FR Green Top 42s with the correct data from the Banish DVD, now I cant...
Thank you, I'll give it a try!
Hi,
How do I go about disabling the clutch protection on coyote cars? I was told to 0 out the enable energy table under trans>tq management. Although, the way I read the decription of the enable...
Any updates on this? Ran into this problem today and not sure how to solve it.. Thanks