I just had my car dynoed and where did my hp go? This is the first dyno chart:
http://home.ripway.com/2005-7/351255/redonedynochart.jpg
As you can see I am suppose to be getting 409 rwhp acording...
Type: Posts; User: patmo
I just had my car dynoed and where did my hp go? This is the first dyno chart:
http://home.ripway.com/2005-7/351255/redonedynochart.jpg
As you can see I am suppose to be getting 409 rwhp acording...
Well I tried messing with the OLFA and it made it worse so I thought I would get a second opinion on the matter from a local mechanic. He told me about how at ilde the cars at our altitude(5280ft)...
If I lowered my Min ECT temp for Adaptive Idle Rpm to engage the closed loop could this help?
I have followed Gameover's guide to setting your idle but I'm still getting pulsating idle when it is in open loop(I assume that is what it is caled when the engine is warming up). I don't know what...
My buddy does mainly work on C1, C2, and C3's. He just bought a salvaged 2001 z06 and is going to build one of those c2 bodys on a modified c5/c4 frame with the ls6 motor in it. We need to know what...
Yes I did notice that my error mode was set to 1-MIL on Second Error. So if I had just shut it down and restarted it it would have probably given me the SES light Right??
I tried yesturday to do some logging of my ltft's but when I loaded my MAF fail freq to 0 tune and started the car I got no SES light to let me know it was in sd mode. I looked using the scanner at...
Do you have to set Maf freq to 0 to log ltft's? I did my first log and did not set the maf fail freq to 0 but still got good readouts on the ltft's. Are these inaccurate? Is the car going to drive...
Hey guess what? My shop never put in the new injectors. I have to go and pick them up tommorrow. They are the accel 30# ones. Does any one know the flow change multiplier for these??
The maf calibration table and the VE tables are almost exactly the same as stock. How would I know if I am running rich? If I scaled my fuel table back what would the result be? Could I hurt anything?
I just got HPtuners and have been going through the programming my tuner did after a head & cam job. We added the svo30# injectors but I noticed my injector flow rates vs kpa vac are exactly the...