Appreciate it man! Yes sir, it is drivable now so I can get to work on it.
Type: Posts; User: Larry Reed
Appreciate it man! Yes sir, it is drivable now so I can get to work on it.
I took 2 huge swings at it this afternoon and went to far lol. working on adding more fuel. Thank you all for your help. 07gts got me over the top, I just had to really lower the entire VVE table and...
107734 log file from tonight.
Just Crazy Rich! Doesn't seem to matter what I do.
took some swings at the error and didnt seem to matter. I'll spend some more time with it tonight. Also I'll make sure it's setting the mAF error code. I had the lamp on 2nd error, I'll change it to...
Nope
Not much better. admittedly it did run long enough to warm up, but still 20-30 percent rich even with AFR commanded at 14.7
Awesome! I'll download it tonight and let you know what it does.
I did have the injector data in for the 1,000 cc injectors. I switched back to the stock injectors and data because of it being so rich. I had decided to take it back to as stock as possible and...
Thank you very much for the info, I see what you are talking about. Believe it or not, those tables are the same as the as found. But I'm going to take your advise and bring them much closer to one....
Yes sir, that is correct. I have MAF running fairly well but can't run SD at all because it is so rich.
has a cam and 75/78 turbo. swapped back to factory injectors chasing this issue. the car runs pretty good on MAF only tune.
I am having the same problem here, see attached tune file. Insanely rich at start-up, commanding 9.6 and logging shows 20% lean. Cant stand to let it run indoors as its so rich.
Not drivable.
...
Kind of the answer I was looking for! Thanks
I put the high rpm disable/reenable to where you recommended, installed factory air cleaner and ended up with about half the MAF airflow vs frequency, still on .75 to .80 lamda.
thanks for your reply, its obvious I,m in over my head. If i set high rpm disable low, it hates life and wont "really" run. PIG rich. No matter what i throw at it with MAF. I have replaced the MAF...
try this
I've tried every thing I can find to disable VE tables. Taking Huge swings at MAF tables and not changing A/F ratio. I wonder what I'm missing?