Search:

It wont shift out off 6th until the shift schedule is satisfied, that is the throttle position verse speed is below the blue line.

Hi amello 7580, the two attached documents are from a VE 2006-2009 service manual, I assume the trans needs to be at least above 40 degrees to learn.

Hi Anothernord Can you please tell me which output from the PCS2655 you are using to signal the engine controller? Thanks

Thanks hjtrbo Appreciate the input, I will have a look.

Hi there Anothernord, I have just finished putting a 6L80E behind a GEN3 Ls1 in a Holden Cross 8 Crewman, also using theTCM-2650 as the base control. I am just stating to try and understand the A6...

Hi Poindexter
I also had issues with 3rd gear limp mode, I was getting a P2534 code. What worked for me was to swap the PCS TCM-2650, "Yellow Switched +12V Battery Wire" from an ignition feed that...

Wanted to throw my two cents in for posterity, I have just finished putting a VE 6L80E, running an '09 OS, behind an LS1 using the PCS TCM2650 as the gateway controller. I have also fitted a VF...

Thanks ill go back and have another look.

A question for one off the team at HP tuners. I have a 6L80E running behind a GEN 3 LS1, using a TCM2650 to interface the two, so two DTC connectors one for the engine and one for the transmission....