Well done, found 4 black wire rings, connect all to the "-", and finaly, it works
Thanks
(#51 on my todo list can be erased)
Type: Posts; User: Dontov
Well done, found 4 black wire rings, connect all to the "-", and finaly, it works
Thanks
(#51 on my todo list can be erased)
Correct, no check engine light
That's make sence
I will test this in a few hours
Thanks
(well, the first of my LS i modded -H/C/I/FI forged stroker C5 all by myself- i had'nt connect the...
Hi,
I have no more engine in the bay on my Corvette C6,
(putting my iron block H/C/F1X in a few days)
and have a lot to do on the tune
But... Cannot discuss with.
Have test my MPVI pro...
Solve,
As read issue at 74.2% seems just the voltage check,
don't know why all was ok in 2018 (same car, same Ford options, no electric stuff installed, just different VCM suite version), but...
Hi,
After a couple of change on the lastest tune, i try to write entire, and it failed at 74.2%,
i tried 10 times or so
Here are all the check i done :
- check battery
- check PC battry
-...
Thanks,
as this param is not in HPT, i asked to support to add it,
i will see.
No other option just with HPT ?
Hi from Europe,
i tuned a '08 Cadillac CTS 3.6 V6 (E69 ECU) for E85,
car drive great idle/cruise/wot, but it's another story when cold start (really bad idle, need to stop and restart).
I...
bump ?
Hi,
Since the engine of his 2004 300C was out, the -french, as we are in France (Europe)- owner bought 300C engine,
as he -i think- only find a 2005 engine and not a 2004, bought the package with...
Hi,
Completly lost with j2534 stuff, so, have questions :
1) did you have low cost interface link ? (is this is ok ?...
Yes Paul, great tune, thanks for all !
here is not the same, it's bullit with bullit axes on the tune,
and with PD, it's probably not a bullit TB now,
i need 2019 GT tuned for bullit TB and axes are not the same, i tried to adapt with...
Hi,
I tried to tune with "driver demand", "predicted throttle angle", "effective area" from GT350 tune, but axis are not the same, and all i do (with Excel conversion) is crap when driving the car...
i tried to manage some number between some sheet as some as not indexed the same (i.e 500 / 750 / 1000 rpm and the other 400 / 600 / 800 / 1000...) so perhaps i made mistake...
As you can see here, the kit installed (w/o calibration stuff, cause they ask me for help) don't speak about TPS convertion
(Sorry for delay, never have email of reply)
I already contact support, they cannot do something as the car was tunned without a perfect tools
Don't have autel or other software/hardware, just...
Hi everybody,
somebody install intake and GT350 TB on his 2019 Mustang GT before think about tune the car,
i have try to tune for GT350 TB with advice on a post here (driver demand, predicted...
Hi,
so, car is already tuned,
cannot read the tune (no VIN and not able to read) probably because tuned with other tools than HPT,
dealer not able to tell/don't want to tell about previous owner,...
and for my Viper issue,
1) as the PCM is already tunned, by other tools than HPT, should i try to write entire from a repositiy viper 99 stock tune ?
2) as i know it exist some SKIM issue cause of...
thanks, i will try this day
France (sorry for the delay, i haven't see any replay alert :-( )
Hi,
car is already tuned,
no cat so engine light,
cannot read the tune (no VIN and not able to read) because of using other tuning tools than HPT in the past,
dealer not able to tell/don't want...
Up
Up please
Hi,
I posted in Engine/Gas section (title : "Challenger 3.5 stopped and never restart, no DTC on VCM, SKIM or key issue ?", but perhaps better here, as it can be SKIM related
Firstaval, i'm...