Search:

Then save me from all this time wasted trying to figure it out. Mine is a '20 ZL1 A10 with T83A TCM that's currently only programmed to delete first gear while in Manual, but I want it in Auto also....

Has anyone done an A10 T87A (or T93) TCM 1st gear delete in Auto? My 1st gear is deleted in Manual only.

Well, I can write to an unlocked 87A TCM and not write the ECU, so I would think so.

1. Delete contents of folder, HP Tuners\VCM Scanner\Vehicles
2. Download current HPT Suite (or Beta) and MVPI drivers,
3. Connect the laptop to OBDII,
4. Put the car in service mode, WB should...

1. Delete contents of folder, HP Tuners\VCM Scanner\Vehicles
2. Download current HPT Suite (or Beta) and MVPI drivers,
3. Connect the laptop to OBDII,
4. Put the car in service mode, WB should...

If you're having trouble using the AEM X-Series OBDII WB channel in HPT, try this:

1. Delete contents of folder, HP Tuners\VCM Scanner\Vehicles
2. Download current HPT Suite (or Beta) and MVPI...

And where can I find the user's manual for WIDEBAND UEGO AIR/FUEL CONTROLLERS
PN: 30-0334?

Found it, thanks

Do I switch to Can mode? PID is not mentioned in the manual

I'm having the same problem selecting the correct AEM WB channel. Here's my selector. The only WB is found under external inputs. There's no OBD or controllers

Typing OBD or controller finds nothing relevant. Typing WB only finds the attached under external devices. And I only see 0x7E0 thru E3

Would you snip and post an image showing where it's located on the channel selector? Thanks

Here's what my channel selector looks like:

Murphy's Law rears its ugly head again.

I bought my 30-0334 X-Series OBDII Wideband Gauge from HPT in August and worked fine and logged numerous pulls in HP Tuners VCM Suite until... two weeks...

I'm having the same problem you had with the AEM X-Series OBDII Wideband AFR and Controller Gauge. I've been logging data with it for two months but it stopped two weeks ago. I open a layout, right...