[QUOTE=SiriusC1024;777173]Disable Trans Diag>General>Max Line Pressure DTC>P0101-P0103
Yes.
He uses wideband OL. Use narrowband fuel trims. Wideband for PE. Run in CL because...
Type: Posts; User: corsairguy
[QUOTE=SiriusC1024;777173]Disable Trans Diag>General>Max Line Pressure DTC>P0101-P0103
Yes.
He uses wideband OL. Use narrowband fuel trims. Wideband for PE. Run in CL because...
350hp on chassis,, 480hp @6700 rpm at crank westeck did the break in for me. (Single plan intake with a 750 Holly) No efi tune.
Had to go back to stock intake and TB for daily driving no one can...
Can anyone tell what might be causing this???
2 chassis dyno tunes,,1 driveway tune. $2500 in tunes and this is what I get.
No one want to do a whole tune they just seem to want to get you on...
Hello
I've been following Goat rope Garage vid on tuning VE Table.
Not once did he or others mention that tuning your primary you also need to tune your secondary ve table cause your running on...
just looking for the bluecat trans download.
Can anyone direct to the download?
yep
Thank you for responding Alvin.
OK I'll try and explain.
On my scanner it's only showing me up too 95 kpa's. (ve-tning) The graph goes up too 105kpa's. I've done alot of runs and it's just not...
Yes I can't seem to get my kpa's up passed 90kpa on my graph/scanner??
I'm sure it's in the os settings somewhere??
I have this.
Running BTR stage 3.
Also supplied mods list.
1 3/4 headers.
Didn't run with a 102mm couldn't get to idle had to run stock 73mm. Idles good still pushing 480hp at crank.
Wow
I've watched so many vids on this and no one has mentioned that.
I was able to get one run before I lost my lighting. I think I just seen things move?
I'm sure there is SO mush more to this....
5.3l 330ci
I just can't see it.
I can't get my ve- tuning to richen up at top-in. Staying 15% lean. Took ve table up 15-20%. Increased PE EQ- Ratio up 10% and still not moving????
I've provided...
No new to the forum/hp tuner world.
Thank you I'll look for it.
Does anyone have a STOCK 1999 Chevy Silverado 4.8l/5.3l tune I could get to reference from????
Hi Guys
Hi:cool:
I have a 5.3 pushng 475hp (dyno-ed) 330ci btr stage 3 cam. 39lb injector (@60lb pressure) with stock intake/tb. 471Ft lbs torque
Still tuning but this is what I have so far. (Tune file)
Hope it...
I have a 1999 Silverado 5.3l (swap) btr stage 3 cam. Running 39lb's injectors.
I would have to agree with HATEHPTUNERS that VE-Table is WOW!!!
I have a tune (Posted) that I'm still working with. It...
By far I'm no pro at this I took a look at your tune just to learn a little about other tunes. (I'm also having issues in tuning myself.)
I did notice that your STFT is still Disabled and you LTFT...
I'm running a 5.3l pushing 476hp.
I looked at your file. Your 50lb injectors sound big too me. Make sure your data on your injectors are entered correctly. I'm running 39lb and having to turn them...
I hope this works.
The scan attachment is with lT and ST still on with a X series inline wideband controller in the tail pipe.
I understand why it shows lean between 0- 3000. (Scavenging) I'm...
Thank you for responding.
I'll get on it Friday. I work 14hr days have Friday's off. New to HP Tuner. (Only 3 weeks with one.) Going to take a few to learn how to download things. Didn't even know...
Hi
My AFR is show red 25.00 @3600-6500. Should I go up with EQ first then VE Table??
Is .80 in EQ to low 400-1200 Rpm