Search:

So, here is the run down after 341,816 miles on the original motor I developed a really bad lifter tick, so I figured since I got to get a new cam, and lifters I would go with Comp Cams 68-301-5 cam...

anyone have a chance to look at my tune

Thank you everyone for the comments and ideas the line pressure was turned up, and now on the gauge it reads.
psi in park and drive was 120,
psi in reverse and cruise was 150,
psi at WOT was...

So I'm way out of specs

This is what was done by RPM
Media Blast Transmission Case
RPM Level VI 3-4 Clutch Pack
RPM Reinforced Sunshell with Collar and Bearing
4L65E Low Roller Clutch
Billet 4th Gear Servo
Transgo...

Thanks for looking at it TransGo Robert does my line pressure seem right? I called RPM but no one in tech answered, so I had to leave a message

Hey, everyone, I have a RPM built stage 6 4L65E that is flare/soft shifting through the gears. I put a pressure gauge on it and my readings are
Park hot: 60psi
Reverse not moving: 90psi
Reverse...

Call up FTI I have one of their 6 disk converters in my GTO

I have a blower on it?

I'm having it done remotely I don't have anyone within 6 hours of me that doesn't screw up peoples cars.

Thank you very much ill send that to my tuner

can anyone tell me why I can't command less then 15 degrees of timing on this e40 tune

127488127489

here is some runs and vcm info127438127439127440127441127442

I was wondering if anyone can check the hexcode on my e40 ecu and see if there is a minimum final spark table that was added that I cant see on hptuners?

I'm using the exact same setup does any of the other wires get used like the ground or is that it?

The build is a 2006 LS2 with a magnuson mp112 supercharger the throttle body is stock as is the maf, the heads are cnc ported 243's and the are bolted onto stock head gaskets. It has a flowtech...

Crap! How the hell did I do that?

I don't have any data for those injectors I was just told over on the ls1gto.com that those are a common injector to run. And I just ordered 2 bar sensor I didn't know I needed that the magnuson...

can someone please look this over this is wonderful Frost tune I got back after waiting a month for it
The build is a 2006 LS2 with a magnuson mp112 supercharger the throttle body is stock as is the...

Is there a tuner simulator that I can get hands on experience without a car or the fear of blowing up an engine? Kinda like the old desk top dyno back in the day

Okay Guys long story short I sent my ecu off to tuned by frost, well he flaked out and had my computer for a month, and now it extremely hard to start and idles like crap! I ordered hp tuners and a...

Awesome thank you very much

Can I use the Prolink+ and the AEM Electronics Inline Wideband UEGO Controller 30-0310 together to tune? I'm not really wanting a permanent gauge in the car

I have an E40 I believe its an 06 GTO