Yes possible..Unfortunately, not with HPT.. I tried it with success using BitBox software.
Type: Posts; User: talsayed
Yes possible..Unfortunately, not with HPT.. I tried it with success using BitBox software.
Guys, good news...
I was able to read from LX570 2015 model GCC specs, using the latest Beta version.
A new message will pop up asking you for permission to modify the existing vin number.
106484
Thanks, QTR FMS. Very interesting to know how the Torque model affecting the cruise control... We wish all Toyota specialist in this forum is lighting more on Toyota ecm strategy..
.
Why the cruise control might NOT work properly?? Any clue?
+1 GCC Gulf Spec.
104972
...
GCC specs not supported yet.
2016 Audi RS7 Stock file
Maximum timing essentially depends on the Crank Position/Angle sensor setup (see attachment).
Therefore if the maximum advance you wish to run is 50 deg, the Trigger Angle value should be set to at...
You don't think that the CAT is blocked for a reason or another which will chuck that bank particularly!!??:crazy:
Log ETC position % pid instead of Throttle position sensor & you'll be able to see (100%) WOT:yay:
I agree with you if he has rich condition in both banks,not in one only.:crazy:From his tune file,it looks LTFT is disabled.:doh:
http://www.hptuners.com/forum/showpost.php?p=103069&postcount=1:drivin:
Read this:http://www.hptuners.com/forum/showthread.php?t=22574
In addition,Exhaust gas temperature sensor (Pyrometer) will show the same way in relation with timing.More timing=less EGT,Less timing=More EGT.:crazy:
Can you post it plz?
Congrats,glad to hear that.:yay::drivin:
Here is your tune file with VATS+Clutch Inerlock disabled.:burnout:
write entire must be performed (VATS only).
OK,go to Edit----->View------->Advance
NO,am using ver 2.22
still don't see where VATS is under the OS>General tab.
I was going to ask about E10.:confused:
Thanks flea.Thank you guys for the explanation,we usually don't use these stuff in our region (E10).:yay:
Have you tried to disable Clutch Interlock?:confused:
(you may missed my point in post #5):doh:
No,Vats will let you start the motor,but won't be able to drive faster than 2mph
if vats is active.:drivin:
Do one thing:Go to System---->General----->Clutch Interlock [Disable it].
Try...
Go to: http://www.bmotorsports.com/shop/index.php/cPath/129_142
They stock all your needs.Sensors,Connectors,Pigtails,etc:yay:
LS7 07 injector flow @ 58psi = 41.73739 lb/hr
...