yeah it should, so long as its got the amperage, which most likely will be the case,12V on AT/ATX PSUs are normally more than sufficient, 1.5A continuous is ok, so long as it can handle the switch on...
Type: Posts; User: charliex
yeah it should, so long as its got the amperage, which most likely will be the case,12V on AT/ATX PSUs are normally more than sufficient, 1.5A continuous is ok, so long as it can handle the switch on...
use the demo if you just want to mess about on the cheap.
or you could take the source to one of the free mac emulators , add the missing instructions (theres only a couple) and build one from...
i use one of these...
http://www.ashware.com/ have one
you'd get something like this
ROM:00000000 dword_0: dc.l $FFE800 ; DATA XREF: sub_1128+D9Ao
ROM:00000000 ; sub_1128+DC0o ......
well you could use it to simulate an ecu or such, it'd be limited though. the are are software alternatives to it, i considered picking one up, but they're usually expensive with limited RAM so i...
there are different types of 332's is it the motorola board?
some more info would help with an answer
ida64 is for 64 bit processors ,itanium, alpha etc
find the processor type, see if ida supports it, if not use the sdk to make a processor pack
check the endian and byte swap the input if necessary, i never figured out if ida supported this, its...
i just knocked this up, using craigs method of adding a RAM segment, if you prefer enums to addresses change the commented out enum() and comment out bytes_0()
theres still stuff to add, and the...
i've been working on a toucan software simulator, its running the cpu pretty well, and i'm just mapping in the toucan stuff. i'm interested in getting a sampling of different rom dumps to exercise...