Search:

Thank you both

wanting to make sure i have correct data. think i have an injector going out. have a labor knock on sounds like one cylinder and trying to pin point which cylinder. can primer till bulb is hard and...

I really do appreciate all the help fellas!! I got n/a tuning down pretty good now for the next step. Thanks again!

Springs are brand new and I do know that I am going to have to update a lot of data. I am just wondering about OS updates. Thanks for your knowledge and help.

If going from n/a to turbo would I only need to update the OS to the 2 BAR and that only? The others seem like they wouldn't be needed. Learning all help appreciated.95394

I was having the same problem but I have an automatic trans. By what I see you have a manual and I don't know if that makes much difference, but if you go to the trans tab click on shift scheduling...

Thanks again!

I am gonna play it safe tear it back down and replace all the lifter and hope the cam ain’t screwed! Again I appreciate the help!! I am still curious as to the many many many cams that were squeaky.

I appreciate all the knowledge fellas!!

Stock and yes changed the valve stem seals

@mbray01 does the squeaking on the one name brand cam cause damage or just annoyance?

I have cranked without belt and it does the same thing and I call myself checking all the rockers. @mbray01 can you private message me the name or I will just tell you the name of my cam It is and...

Also it is an intermittent chirp at low rpm then it will quit. rev to 1500-2500 and let off and it chirps till you get back down to 1500 rpm. under load it doesn't seem to do it. thanks again!

Man I sure hope not. They are brand new and the sound seems like it is coming from the top of the head. Thanks for your knowledge.

I have a 99 5.3 just put a .560 lift cam, springs, lifters and timing chain. Cranks, idles but between 1500 to 2500 RPM there is a squeak coming from the passenger side top end. need help on what...

Thanks. I have some 42lb injectors/ .560 lift cam/ roller rockers this isn’t installed yet. I will definitely get the wife band and go back to stock table for now.

Thanks for all your knowledge!!

just headers and clutch fan delete for now.

Haven't checked for leaks or fuel pressure.

added the 15% due to not having wideband DID NOT want to go LEAN at full throttle. would rather be to...

I added about 15% to PE and all has been good started adding a degree or 2 of timing (currently 4 up from stock across the whole graph) and all the sudden when coming out of open loop the ltft is...

new to this myself but you can usually type in specifically what question you are wanting to ask in the search bar and it will pull up info. like 42lb injectors you can type that in and it will bring...