idle is different with AC ON/OFF. try with AC OFF, idle should be lower
Type: Posts; User: Ludo80
idle is different with AC ON/OFF. try with AC OFF, idle should be lower
check for leaks around the plenum or throttle body if idle is too high
The only way in my opinion is to read/write in jtag. I got the case on an SH7055 and I bypassed the uprev lock with ktag in jtag.
should be possible to convert. Share your hpt file mate.
which dtc do you get ? this ecu convert torque request in throttle opening, if you requests too much you will get P0605 - internal rom error
Good job, romraider mappack is usefull ;)
well, I am open to discuss with you about these maps if you want, but for that you have to know that some maps are missing in your mappack as I already said ! Have a look into romraider 350z mappack...
HP tuners mappack is not sufficient to do pop and bang on these ecus, some fuel cut/fuel restore maps are missing
Yes there is rpm fuel cut and rpm fuel restore maps. I have done pop and bang last week on 350z and the dump structure is very similar, shoulb be ok tondo P&B I am pretty sure