Search:

Type: Posts; User: Billycar11

Page 1 of 2 1 2

Search: Search took 0.00 seconds; generated 1 minute(s) ago.

  1. Replies
    5
    Views
    383

    But what hp model does it have and Intel or AMD...

    But what hp model does it have and Intel or AMD CPU?
  2. yes it reads the tune off as it is so when you...

    yes it reads the tune off as it is so when you write it back it will have your changes that efi live made
    this is only different on newer cars that have encrypted tunes or cant be read only written...
  3. Replies
    5
    Views
    383

    its because the galaxy book go uses an arm cpu...

    its because the galaxy book go uses an arm cpu not intel or amd that are x86
  4. Replies
    2
    Views
    558

    best way to check is to pull the tune and see if...

    best way to check is to pull the tune and see if it shows up in the dtc list if it does then you just uncheck ses enable and put error mode to no error report and you should be good
  5. Replies
    9
    Views
    4,241

    well the new one they added works so hptuners if...

    well the new one they added works so hptuners if you read this thanks! and add this for the 06 guys too
  6. Replies
    9
    Views
    4,241

    well they added another one who knows if it works...

    well they added another one who knows if it works
    113666
  7. Replies
    9
    Views
    2,953

    I believe hptunners will tell you if you should...

    I believe hptunners will tell you if you should do a table write or a full write just do what it suggests
  8. Replies
    9
    Views
    2,953

    Probably just put your original bcm and pcm into...

    Probably just put your original bcm and pcm into the new car no credits needed that way or find a buddy with a tech 2 to match the bcm to your pcm and if.none of that works yea another 2 credits and...
  9. Replies
    9
    Views
    4,241

    sure its mostly overkills tune i bought a pcm...

    sure its mostly overkills tune i bought a pcm from him but it gave a check engine light for an o2 sensor p0053 that it didn't with the stock pcm so i just copied the tune off and licensed my pcm ...
  10. Replies
    9
    Views
    4,241

    Well all progress has stopped they replied with...

    Well all progress has stopped they replied with this.

    "I do not have any suggestions as we are not tuners and aren't able to assist with tuning. We don't know if those parameters would help, they...
  11. Replies
    9
    Views
    4,241

    they respond back by adding 3 new things in the...

    they respond back by adding 3 new things in the newest beta
    2052 - RPM limit AFR Thresh
    2053 - RPM Limit AFR Time
    12074 - RPM Limit AFR

    they are under engine>fuel>cutoff DFCO
    i dont...
  12. Replies
    9
    Views
    4,241

    seems like a common issue on 06+...

    seems like a common issue on 06+ https://forum.hptuners.com/showthread.php?71553-did-i-miss-a-speed-limiter-still-top-out-at-110&highlight=speed+limiter
    my 07 does it too tested it out going to...
  13. Replies
    2
    Views
    1,677

    its not on the supported vehicles list. ...

    its not on the supported vehicles list. https://www.hptuners.com/vehicles/
    but they did just add toyota support with the new mpvi2 they may or may not have future plans for it
  14. Replies
    33
    Views
    11,572

    but people forget that they are locked out of...

    but people forget that they are locked out of there own car, yes you can reflash it if they remember but what if it is so heavily modified that it is not even safe to run on a stock tune then they...
  15. Replies
    33
    Views
    11,572

    nah what happens when some client moves away or...

    nah what happens when some client moves away or you no longer offer services. if your tunes are good they wont need to go elsewhere for someone to read the tune and will come back to you if they need...
  16. would think it has to do with the idle speed vs...

    would think it has to do with the idle speed vs ect try messing with that move the cold cells over to the more warm side but leave operating temperature alone ~180-~220 F
    80287
    probably also has to...
  17. Replies
    7
    Views
    2,001

    yeah had that happen to me too i was like what...

    yeah had that happen to me too i was like what the urf you HPTuners guys could have sent an email saying you need to make a new account so we were not all annoyed by trying to get in.
  18. Replies
    6
    Views
    1,543

    hmm maybe try re enabling the dtcs that thread is...

    hmm maybe try re enabling the dtcs that thread is old from 2007 maybe they made it so all you have to do is set vats to off an hp tuners staff guy said somewhere most cars just need to set vats to...
  19. Replies
    6
    Views
    1,543

    maybe try checking the ses box like this guy says...

    maybe try checking the ses box like this guy says https://forum.hptuners.com/showthread.php?12399-Disabling-VATS-on-non-Alloytec-V6-car-PCMs&p=518933&viewfull=1#post518933 and see if that works
  20. Replies
    4
    Views
    3,858

    weird your trans temp is above 70c, i have seen...

    weird your trans temp is above 70c, i have seen others say even when its up to temp it wont work if you tried it before it was hot enough try again when it hits like 80c but dont attempt to learn...
  21. Replies
    1
    Views
    755

    no connecting and reading with scanner will not...

    no connecting and reading with scanner will not reset readiness monitors but clearing codes or writing an new tune will reset them
  22. Replies
    3
    Views
    958

    if you put a new pcm in you will need to...

    if you put a new pcm in you will need to relicense it and rewriting the old one can be risky and could have to relicense it if you do not put the same os back on
  23. Replies
    2
    Views
    2,140

    i think support needs to transfer over your...

    i think support needs to transfer over your serial number and credits or you can get your friends account from him and change over the email to yours
  24. Replies
    6
    Views
    1,236

    if the tunes not locked you can read it with vcm...

    if the tunes not locked you can read it with vcm editor you log with scanner. then you need to license it to edit even if that shop uses hp tuners because it is only licensed to there unit.
  25. Replies
    3
    Views
    1,083

    this is the smallest thing i could think of that...

    this is the smallest thing i could think of that runs full windows that has a screen attached https://www.youtube.com/watch?v=Ghe0LSDrVmA
Results 1 to 25 of 30
Page 1 of 2 1 2