Search:

Type: Posts; User: cjg454ss

Page 1 of 7 1 2 3 4

Search: Search took 0.00 seconds.

  1. c6 twin turbo closing tb on 2 step....file attached

    c6 stock twin turbo is closing the tb when the 2 step is engaged. 2 step is a lingenfelter setup.
  2. it has a built 6l80 from circle d also

    it has a built 6l80 from circle d also
  3. walbro 340 pump with a kb boosta pump. stock...

    walbro 340 pump with a kb boosta pump. stock rails and lines
  4. im running some older injectors that were bigger...

    im running some older injectors that were bigger than 63lbs. i thought it was setup like that because the ecu couldnt handle any bigger injectors. i could be wrong as the injectors have been in there...
  5. Replies
    4
    Views
    5,629

    raptor vs limited file

    anyone compare these two files. anyone have a 450hp limited file?
  6. Replies
    0
    Views
    2,044

    raptor vs limited file

    anyone compare these two files. anyone have a 450hp limited file?
  7. thank you for the help. I see my lock up mph was...

    thank you for the help. I see my lock up mph was higher than the shift mph commanded. just so I understand. if I want it to lockup in 3rd gear at 85mph then it shifts to 4th at 115.. I need to have...
  8. Anyone?

    Anyone?
  9. Replies
    21
    Views
    14,904

    my twin turbo c6 picked up 7mph in the 1/2 mile...

    my twin turbo c6 picked up 7mph in the 1/2 mile by locking the converter.
  10. c6 ls2 twin turbo boost question - tune attached that has lived for 48k miles so far

    first off, guys enjoy the tune- it has lasted over 10 years like this and 48k miles up to 12psi on 93/meth only.

    on a stock bottom end, what is the limit of the ls2 in a 6l80 corvette.

    ...
  11. C6 6l90 circle D stg3 tune and log, need help with lock up on 3-4 4-5 shift

    hi guys, I have a twin turbo c6, circle d trans and triple lock circle d converter. recently was referred to a website because circle D who provided the tune for my transmission a few years ago no...
  12. 2015 f150 2.7eco stumbles after refueling

    here is alog of a 2015 2.7 eco all stock. fuel trims -28 and then misfires. seems to correct itself after it pegs af lean 20af. once it corrects it will idle and then start trimming negative until...
  13. figured it out. burst ko=nock

    figured it out. burst ko=nock
  14. jagged timing twin turbo sts corvette ls2

    I recently switched to a 2bar map sensor and failed the maf. when adjusting the VE I have it at 11.0 where I want it on 12psi. my timing however has become jagged now under load. before with a 1bar...
  15. Replies
    3
    Views
    1,029

    it say is unlocked

    it say is unlocked
  16. Replies
    3
    Views
    1,029

    sts c6 1bar tune converting to 2bar

    I have a 2006 C6 auto with a sts turbo. it was tuned in 2010 from someone else and has been running very good. ls2 engine is stock other than valve springs. I just started looking at the tune and...
  17. Replies
    2
    Views
    1,305

    I have several e85 files over the past 18 months...

    I have several e85 files over the past 18 months that run great. well over 430rwhp.
  18. 10 speed trans issue. can no longer flash

    I had tuned my trans in my 2017 f150 10 speed and im trying to flash it 6 months later and im getting a web server connection error. has anything changed? I know the tuning versions have progressed....
  19. Replies
    6
    Views
    2,678

    the only thing I see is the boost is raised...

    the only thing I see is the boost is raised slightly over stock. timing and fueling is left stock. even the 105mph speed limiter is still on
  20. Replies
    4
    Views
    5,056

    2018 f150 ecoboost 3.5 file

    anyone have one to load up. id like to see if any changes were made.

    thank you

    chris
  21. Replies
    13
    Views
    5,479

    hi Puggy, did you drop all the three cells to 75...

    hi Puggy, did you drop all the three cells to 75 or only the one that was 120. I have three total cells, 135, 135, 120
  22. Replies
    13
    Views
    5,479

    any way to boost the voltage to the pump? my rail...

    any way to boost the voltage to the pump? my rail pressure is dropping to 1900psi. the truck runs at 2900psi rail pressure.
  23. Replies
    13
    Views
    5,479

    thank you for the info, I noticed that the truck...

    thank you for the info, I noticed that the truck pulls hard even though the limit comes up when the rpms get to redline. is there to change the injection cycle longer. I'm already starting 285.
  24. Replies
    2
    Views
    1,749

    i sent you a pm, call me at 602-339-9618

    i sent you a pm, call me at 602-339-9618
  25. Replies
    13
    Views
    5,479

    7533175332

    7533175332
Results 1 to 25 of 168
Page 1 of 7 1 2 3 4