maybe you're misunderstanding me when using the speed density calculator you can choose the mapped point table you what to a just then there is a exhmap you can also choose which changes the tables...
Type: Posts; User: spoolin342
maybe you're misunderstanding me when using the speed density calculator you can choose the mapped point table you what to a just then there is a exhmap you can also choose which changes the tables...
when using the speed density calculator how would one figure out what EXH.Map to select when making changes is there a pid or a inferred table to base it off of ? I see the max exhaust Backpressure...
when using the speed density calculator how does one figure out which exh map i would need to make changes for a 2021 GT500 is there a pid or a inferred table i should be looking at
2021 gt500 how can i find out what the circle with the lighting bolt means scanner says no codes comes on after a pull. the car has id1050s , headers e85 only gos off on restart. any way to figure...
thanks man i had to do that twice but it worked
anyone come across this error. "controller init: not ready". when trying to flash/write a gen 4 viper ? any ideas on the cause ?
what features are in this mod ?
i have done the tcm rev patch works great was wondering what the HPT custom feature changes or adds ?
thanks i figured something had changed
such as catalyst test or o2s test monitor switch's in engine diagnostics i have disabled them and they still show as in use. so I then started to turn on and off others like misfire, evap, egr, and...
2018 mustang GT emission monitors can't seem to turn them on or off. I have tried all of them, "even ones i don't need too". Then checked with scanner and no changes has anyone else had this problem...
id 1000s and mix 50/50 c16/pump
I tried it and the truck gos in to some type of failsafe mode no lites or codes but will only give you about 30%throttle. I have also flashed it completely stk or basically reflash the Shelby or...
car has upper and lower pulley setup should make about 17-18 psi the bybass valve opens and dumps it down to 7-8psi I got all the air flow limits set hi already the only thing I did noticed was the...
e38 with 2bar os with maf removed suddently gos into hispeed mode for a split second. makes car pop. you can see in the log timing go super hi during pull then it comes back please ignore the AF I...
hers atje file and a log of it
sorry how do I post tune wont let me attach it
14 srt with cam big dip in rpm when coming to complete stop and has a for lack of description a lite float to the idle ie sits at 850 for 5-10 seconds then idles up to 1000-1100 out of the blue no...
so is there a pid or pids to watch to see whats off. whats the preferred what to a just them. Iam dealing with a procharged 16 SS A8 car it closes the TB after 5200rpm any helpful hints would be...
gt500 trans truction torque comes up on hard tipin all setting for it are at max any ideas ?
ok I'll check that out thanks
will this read from whipple new tomahawk tuner they told me if I try and read it it will put the car in failsafe and wont be able to get it out of it ?
tune is stock and the motor is rite out of the crate no mods just a cai which needs no maf cal
I have a customer who put a new ford racing motor part # m-6006-m50a1 which is a 15+ motor with the 11-14 phases that are supposed to make it compatible with 11-14 mustangs car runs ok but once in...
thanks Sultan
that's sucks about long trims any ideas on idle control ie min tb angle