Can someone post the read file? Others would like to take a look. This forum is most useful through participation and not just PMs
Type: Posts; User: boostlife
Can someone post the read file? Others would like to take a look. This forum is most useful through participation and not just PMs
use the VCM Scanner to relearn the throttle - Connect to vehicle>green power button>throttle relern>done
Yes
Am i reading this right? you are looking for a qualified professional to tune your car. You found the place and the price but think it is too much. You are also stating that you can take a weekend...
Dodge flashing will overwrite all of the tune. it will then be stock
go to Wot upshift and raise values corresponding to the gear you will be using on the dyno. this will keep the vehicle from upshifting
go to Wot downshift and lower values corresoponding to the gear...
no snorkel here. funny you ran into the sprintex choke too. i think i picked up 40hp just by taking the intake of the sprintex i had on the dyno here recently. crazy
Thank you Jay and Curt for the...
i tried raising and no difference, TTS just says pedal.
thanks for the reply. i attached the trans files both modified and stock. in those files i really changed nothing except the upshift and downshift points at WOT. the problem is i have made more power...
Vehicle is 3.6L Jeep Wrangler and i am having trouble at 5700-5800 rpms. Hitting some type of limiter. Can any of you guys take a look at the log and file and see if you have any suggestions. its...
can you share how the best way you found to log airflow?
you have to program the new gear ratio. use vcm scanner, to change gear ratio, perform initil.
then clear dtcs
use the vcm scanner to program the tire size and it should fix it. i have ran into this a few times. i also find it must ding and say hot oil on the dash or it didnt work
ok got it, if you are currently using Diablo CMR and want to use HPT here are the steps
1. buy new ecm $580
2. program ecm to vehicle
3. purchase modification service through your profile $249...
so it looks like the final answer that the Diablo unlocked pcm will not work with HPT. You must use an HPT unlocked pcm when using HPT. Makes it tough and expensive to change tuning platforms. Time...
thanks Curt for the Reply. We are currently using Diablo CMR for tuning. i have not heard that unlocking will tie you to a specific tuning platform. i have a few other vehicles i am working on as...
Has anyone received the message "Incompatible PCM Software" when trying to flash a pcm. The vehicle is a 2016 Challenger V6. i have been flashing it with CMR. Restored to stock, read the pcm,...
auto or manual trans?
to close this out. thank you jggregory99 that was it. it was not highlighted so it was not logging that parameter. thank you for the input it was a long night
Thanks Jggregory99 for the reply. Thats exactly what i have. it doesnt fill the graph it just populates the top row
Yeah that would help. Attached. The aircharge parameter shown in my table does not go down, it only reads the spark on top line.
looked everywhere but cant find Aircharge (G) so i can log WOT Spark Base anyone know? in CMR it is mg/cycle/cyl
vehicle is Jeep Wrangler 2012
After emailing support, their response was "We only offer ECM & TCM solutions. Nothing regarding the transfer case." i will keep looking back and hope that at some point you guys add the T-case...
I am working on a 2012 Wrangler JK model and I am wanting to use HP Tuners for the "complete vehicle" interface. I have come to the conclusion I can program the ECM and now the TCM but there is no...