Search:

I just upgraded to the newest version of VCM and while in the fuel / injectors not all the radio buttons are visable and some are 1/4 showing. How do I correct this issue?

Also in the editor and I...

I had factory automatic and converted to 6 speed. I would like to use the shift light in the dash that the factory six speeds have. I have tried to enable this through tuning but it wont work. Is it...

This thread was outstanding for us struggling with rich idle.
My issue was 12.3 AFR @ idle, found that the idle grams were about 4 high across the scale. I did the cfg scan from cold, copy and...

I have my LM1 on EIO 1 and I would like to get it to be listed into the PID list so I can monitor it that way as well. Any ideerers?

Thanks, Dave

Ok, I am new to the tuning picture here also. I want to tweak the tune on my car and I am a bit confused on the wide band usage / hook up.

I understand the open loop tuning concept with ignoring...

Thanks! I just got to it today and it worked perfect.
I never played with the follower and cracker before. It would have come in handy on the A4 when it was in there, it was pushing me when letting...

I had an A4 and converted to M6 and have all tuned to idle great and such except for one problem.

When shifting between gears the rpm's take a while to drop so the shifts are not smooth like they...

Ok heres the deal. I swaped my A4 out for the M6 and everything went quite smooth except for the wiring to get the Reverse and cags solenoids and cruise control to work.

This write up is for those...

I fixed the problems and did a write up on it.
You can go here for the details.
http://hptuners.com/forum/showthread.php?p=28687#post28687

Ok thanks, I see it now. Pin 32 needs to go to ground (which is open on the A4 plug, no wire on plug) So I'll have to see about moving the purple wire on 33 over to 32 and put the other side of the...

Does anyone know if something besides flashing the same year A4 to a M6 bin file would take care of this? I have done this allready with no luck.
All connections are good and I am thinking it is in...

I figured it had to reach the temps before ingageing but I thought I could just over ride it to go into lock up right away.

Thanks for the advice, I'll scan the temps on my way to work tomorrow....

Another from Northern Illinois South of Joliet :cheers:

Howdy Yall! My name is Dave and there isnt any thing I havent worked on on these LS1's ;)

I have a 02' WS6 A4 with cam and most of the bolt ons to go with it.
I have previously had the car tuned...

PepBoys has the 3 jaw 5 ton puller. I used the 3 ton a few times and it broke so go the extra mile and get the 5 ton. I think it was like $28.

I just did my March pulley swap today :cheers:

I have a question for you folks.
Is there a way to have the TC lock up automatically sooner when the motor and trans is cold?

On the way to work on mornings with 35 or colder, TC lockup wont...