why cant i tune ve table? why does my car idle up high after i put it back in park?
125329
125330
Type: Posts; User: Rjtuning
why cant i tune ve table? why does my car idle up high after i put it back in park?
125329
125330
I have a afr gauge in the truck. I?m also new to the tuning deal. I had someone else tune it to get it running. And I still have my knock sensor. I?m probably going to switch down to a small tires...
I noticed I can add 5 to the spark tables but don't know if its to much. now my ve tables don't look great to me. also is there any way i can get my 0-60 faster? Anything will help! thanks in...
RDF1 we do have the same motor size.
Ttmerc i will try that tomorrow.
thanks guys
why does my truck not chop as hard as my buddys truck we have the same cam (elgin sloppy stage 2). His also idles around 750 rpm when mine idles at around 850? I would really appreciate some help...
Is there anything I can to do to get better fuel mileage out of my big block?
111692
110080
I just tried this one after changing the injector stuff and it does the same thing
I have a 5.3 with a btr stage 3 cam, with FF injector, long tube headers, 4.10 gear, and the trunnion kit installed. It ran good before I put the FF injectors in and now I have to hold my foot on the...
Would a AFR Gauge work for the wideband and for the commanded AFR.
I'll change that stuff and see what it does. Was there anything that looked out of place?
Need help with the idle on my tune i just put a cam in it and it will idle for a bit and them act like it will wanna die. another thing is it seems to be a turd on take off. cam specs are Valve Lift...
I have the MAF frequency on my channels list
I can't get my scanner to read my MAF frequency to tune the MAF. Can anyone help me I'm a newbie so anything will help. Thanks in advance.
How do I get my aem wideband o2 to read in my pro feature scanner? Any help will be appreciated. Thanks in Advance.
Thanks for your help. the o2 work now. any way you can help me with VE table tuning and MAF tuning cause Im new at this.
I have a 5.3 ls cam specs are lift .525/.525 .050:226/234 center line 103 also has long tubes on it. the o2 wont read and stumbles when a hit the throttle. smells like it is running rich. have check...
My support ticket number is 248520
Hp Tuners support staff SUCKS after you buy there product they could care less about you. Bought it to start tuning Business in April here it is November 5 Months later and have a POS. Contacted by...