Thats why for me I will never touch DD unless it is necessary. It drived me crazy until returned 100% stock and focused on VT and Peak table then all issues resolved
Type: Posts; User: rousha
Thats why for me I will never touch DD unless it is necessary. It drived me crazy until returned 100% stock and focused on VT and Peak table then all issues resolved
Exactly, if you use torque limits to control boost this will create more complicated and hidden issues which are difficult to address.. gen 5 torque tables actually interconnected to too many other...
basically Hptuners granted authorization to most sellers only ignoring the fact that most customers purchase Hptuners interface for their own tuning and troubleshooting!
Then what will happen is...
Are you sure that traction control is not kicking in .. I think it will be either a traction control settings or max torque settings are off.. assuming VVT is valid
from the log the maximum engine...
As N2speed said, TQ management for Trans is something different, personally I feel better to leave it as it is for a truck especially if it will be used for towing unless of coarse you know what you...
I think the traction control will not be totally disabled unless it is on 4X4 mode. Thats why there will be intervention.
In order to totally remove it you need to disable it from the tune but that...
post your tune.
I did face the exact same issue while tuning my JK wrangler 3.6 pentastar, however I nailed it and worked every time since, I found out the throttle freezes at -10 or more so I...
try this,
131033
try this
131030
post the tune and a log showing the limp mode
it is difficult to troubleshoot any issues without looking at the settings in tune, so please post your tune.
anyway, check Fuel > Cutoff, DFCO > RPM Limits > Startup Modifiers > Cold Engine table...
I have 1997 manual cherokee, I hope it will work for you
126861
you need to put low numbers only near 0, don't go crazy otherwise it will hang as Neural thing will interfere, or as I think so.
Any way, just to be clear:
- Disable DFCO
- Set the cells on...
Dont forget to use beta version of the VCM scanner
I'm looking for AMG version for m278 if it is even existed, not sure if S-class have S550 amg or not.
wanna pump my stock car tune little bit and I feel the safest way is to copy from AMG version.
Attached is 2015 S550 stock file.
Looking for AMG version if any body have it.
120641
Thanks a lot chevota, I appreciate your quick response and offering your help.
well I think I'm going to backup the ECU as you said and then I will start updating the ECU to enable tuning.
Could...
Hi, I tried to read my own car tuning (2015 W222 S550 4.7 V8) just to take a look at what parameters are available and to get familiar with it, so I connected my MPVI2+ and started reading and...