I found that once you have the PID set up and transformed to the AEM, it will start also populating the generic AFR PID. then I can set up the scanner histogram using the generic AFR PID. Not sure...
Type: Posts; User: ctuinstra
I found that once you have the PID set up and transformed to the AEM, it will start also populating the generic AFR PID. then I can set up the scanner histogram using the generic AFR PID. Not sure...
I'm looking for the very same help. I'm using the AEM 30-0300 with the MPVI2 Pro features connected via analog 1 (red). I cannot figure out if you use just the input on the User Math Parameters or...
Is there a good method to log exhaust gas temps? A sensor to use and how to interface it with HP Tuners? The LSJ I have does not originally have a sensor.
That makes me feel better. Here is a current tune-in-progress. Check out the VE table. Does this look normal (in the cruising area)?
99716
By the way, this is the vehicle I'm working on. ...
I made great progress today. I couldn't help to notice that my fuel pump was squealing a lot during the initial start up. I kept thinking I need to look into that some time and figure out what is...
That's very interesting. I will have to read up on that.
I also noticed that even though I set the fail frequency to zero, my scan still picks up MAF data! I finally unplugged the MAF and that killed the data but also the IAT1 and it ran so bad I couldn't...
I made all these changes and I still get AFRs all over the place. I'm really thinking I have something else wrong outside of the tuning. I can hold the throttle at a fast idle, say 1500 RPM, and...
Good catch on the KR. Knowing the drive I took and where that is at, that was coming off the highway and turning into the driveway, the AFR at decel was pegged at 18 lean and as I turned in, it...
I'm not sure what you mean by injector data fight or transient fueling. What is that and what would be causing it.
In one of the other posts, they noticed that I hadn't failed the MAF to...
I forgot to set the fail frequency on that set up. I had it set on previous ones. That's a good point. I will have to go back and make sure that's set.
I appreciate your response. I've watched about every video he has and followed many of them to the letter. I have the MAF set to fail in Engine Diag, did his suggestions on the DFCO, and have no...
I'm fairly new to this but have read and learned a lot. I have recently changed to a boost reference fuel pressure regulator and changed out the injectors to a split pattern (still 60lbs) and I'm...
I'm fairly new to this but have read and learned a lot. I have recently changed to a boost reference fuel pressure regulator and changed out the injectors to a split pattern (still 60lbs) and I'm...
Erick,
I wanted to make sure you got this information. It may help in the future. Thanks for all of your help. Sorry so long for a response.
Just wanted to give a quick update that I should...
Just wanted to give a quick update that I should have a long time ago. I finally figured out the reason for all of my troubles. I have an AeroForce scan gauge hardwired into my OBDII port all the...
Just wanted to give a quick update that I should have a long time ago. I finally figured out the reason for all of my troubles. I have an AeroForce scan gauge hardwired into my OBDII port all the...
I stand corrected. Google "Blurry Photobucket fix" and there is a bunch of Chrome extensions to fix it! yeah!
Photobucket shut down the free service side and tried to force everyone to start paying for it so many just deleted everything and their accounts leaving many forums with worthless threads. I was...
Admittingly I was surprised to find out the VATS said it was disabled. So if it's not disabled and part of the BCM, one can wonder why is it showing up in the Editor as something that can be enabled...
I was able to recover it using software and firmware released since my last post. All is good once again. I did buy a backup P12 on ebay for $28. I haven't done anything with it yet. As long as I...
Am I crazy or is that a helluva lot of injector for a base model 2.2?
There has been just released another update from my previous post. This one brought it back to life!!!! New Beta software and firmware. It seems to work much better now also, no longer getting...
Crisis overterted!! The new software and firmware allowed me to recover the ECM! There is nothing like the sound of the car starting up again. By the way, here are a couple of shots of the car...
Yes