Issue has been resolved. Not a tuning/bricking issue.
Type: Posts; User: spina74
Issue has been resolved. Not a tuning/bricking issue.
I have a 2014 Caprice with an E38 PCM. I had the car running after doing a write entire with a stock caprice tune. I had to do this due to swapping to another PCM. I was having drivability issues and...
I can flash them myself in the OS tab right?
I have a 2014 Caprice that I did a 6.2 swap into. The car was a roller and ended up using the PCM from the Escalade the 6.2 came from as the car didn?t have one. As of now, I?m getting a service anti...
I just swapped a 6.2 into a 14' Caprice roller. I converted the engine to a non DOD/VVT engine. I'm reusing the E38 PCM from the Escalade as my car didn't come with one. I know DOD I just turn off....
checked for it, still hasn't uploaded yet.
Does anyone know where I can buy an LB7 tune, possibly a 90hp tune? I've only found EFI Live tunes. Thanks
I changed up some of the info in the bluecat software and now all the shifts are right were I like them. The 1-2 shift still feels a little sluggish, but I'll work on that. This is the guide I used...
After reading over the 6L80E tuning guide that's posted on grrrr8.net and getting a hold of the bluecat software I made my 2nd attempt at a trans tune. My first one didn't work well due to a failing...
I've got everything down pat, I'm just curious about the info for the torque converter. I believe the stock converter for a G8 GT is a 1500 stall speed? What I'm not sure of is the Min RPM. Does...
I have a G8 GT with 3.27s which I've already re-calibrated the trans for, and dialed in using bluecats program. I've been doing very little changes to the normal shift patterns because I want a stock...
I got my car with 3.27s already installed. The trans had some recalibrations done, but it turns out they were done poorly. When I launch the car in first and go WOT it refuses to shift and hits the...
I just installed a vararam intake and want to adjust my MAF accordingly. I'm new to tuning and I've only done some minor calibrations in the past. I've read over bluegoats guide on doing so. I'm...
I purchased a G8 last week and I knew something about the car wasn't stock because it was much faster than the other car I test drove so I pulled the tune and compared it to a stock one. The cars...
So I have to buy 4 more credits in order to change the vin, so my licensed pcm can match the body vin?
Ok, I've done a search but its seems my question is different than other. I had my pcm licensed and tuned for my 01 WS6. I purchased a nicer 01 WS6 roller and swapped my drivetrain and pcm into that...
My friend bought an s10 that had been converted to a manual. The pcm was never changed so its throwing auto codes. Other than checking turning off the dtc's is there anything else that needs to be...
I can't seem to get a knock retard histogram or any at that. I can view histograms on my WS6 and my girlfriends GTP, but when I plug into my friends HHR or my Cobalt I keep getting this message
This...
I did a tune on my friends HHR and when I clicked the histogram buttom all the numbered tabs are said to not be supported. i want to log the knock retard but that doesn't seem possible now. What...
I pieced together a gms1 kit for both vehicles. Does anyone have a gms1 file for both of these cars. Also, from much research I'm gathering it is best to load the gms1 then get a dyno tune so I have...
Ok, cool...i didn't know there was a second one until I went back and looked
I just went over the file, and I believe my screw up was where I left the second speed limiter set to 114 :/ and only changed the first limiter. Attached is the stock and modded file, if you want to...
I tried to remove the speed limiter on my friends G6, I changed the speeds for him from the stock 115 to 150. He said when he attempted to go past 115 the speedo stayed constant at 115 and the rpms...
My friend wants his shift points, firmness, and pressure increased. I did a table using some info from other tunes in the repository, but I am not sure if what I typed in is best. His car is a 2009...
Ok, so I licensed my vehicle and hp tuners recognized my dyno tune file which i saved. I changed my tire size and gear ratio, loaded the change. I went t re-save the file as a second file so I have...