Checked it with a guage. No pressure drop at the rail. Stays at 50 psi and only drops to 47 after it cuts out.
Type: Posts; User: Hooker1
Checked it with a guage. No pressure drop at the rail. Stays at 50 psi and only drops to 47 after it cuts out.
Changed it back to 4000. Didnt make a difference
I'll put a gage on it and see if it drops before the cut out. Last I checked it I had 110psi prior to the regulator on the rail.
I disconnected the VSS and it would only stay in first gear but it did not cut out at any rpm. Connected the VSS back up and it went back to cutting out. I put a new VSS in and it does the same...
Thank you. I'll change it and see what it does.
I noticed the STFT is climbing up high right before it shuts down.
Still does ot in sd. MAF is about 12 inches from TB right next to the filter. It's a dry filter setup. Sensors are Delphi
I am having an issue that I have never come across that has me stumped. LS Swap into a square body. Truck starts and idles perfect. Does great shifting into drive and reverse (no stumbling). Can foot...