Search:

Have any logs of it driving with the issue?

The car is misfiring at WOT.
There's a lot of knock going on.
The high octane timing is lower than the low octane table that's no bueno.
The MAF is also going wild, which 5" intake? I'd move high...

Have a file of it including the FSCM? I've done a lot of SS sedans, ZL1, and some 5gen SS that have Zl1 pumps installed in them. My daily driver is an LSA SS and I ran the stock fuel pump with boost...

What CEL did it toss?

Happen to have a log of the shift hitting the limiter? Remember the 6l80s can need some lead time sometimes to get to shift right.

I'm just trying to help them dial in the converter. I didn't tune the car, I think that's where the issue could be. What other tables need to be shown for a lockup other than lockup tables?

If I...

Yes, I've changed that completely with no luck. Even setting it at max tps to 0%, 1%, 10% and it was still unlocking. I haven't messed with it recently with the current desired pressure settings.
...

it was more a question of this specific OS (ECM OS 12660065 TCM OS 24270599). I've talked to a few people who've all had the same issue on the same OS. I've tried more settings on this than any car....

Update, with commanding the lock on the scanner it locks and holds 0 slip. Doesn't unlock on the shifts, Just no idea why it wont fully clamp on it's own.

Been fighting an issue on a 2014 C7 Corvette 6l80 (OS 12660065). I know the Caprice PPV and SS had the same issue for a little bit, but with the flash of the Camaro 6L80 Transmission OS it would fix...

fix it. Uninstalled all HPT stuff. Reinstalled and made sure I had my files off my external HD before i opened anything and they're back. Maybe one day this will help someone else. Not sure what i...

Update still haven't gotten it to work for some reason. I double-checked and on this computer, I have 80 vehicles in (documents -> HP Tuners -> VCM Scanner -> Vehicles )

But when I go to VCM...

That's where I'm having issues. I did that before and it worked fine, but now it isn't working. I'll try to uninstall and reinstall it and see if I just did something wrong somewhere to get it to...

I tried to search but didn't really find anything. Maybe I didn't search the right key works.

Issue I'm having, new computer I have all my files settings etc from the computer I've been using but...

Post the tune, Just because they use stock eletronics does not mean the tune is setup for a stock throttle body. Which code is it tossing? P1516? P2101?

I had my ls3 C6 going into REP without codes. It was caused by engine tq mgmt settings in the tune. I changed them back and it never happened again.

Disable Tq limit 2 tab under engine-tq...

What fuel are you running? I pull more IAT retard on 91 vs 93. I've done a few cars on meth and I usually have the timing I want by using the high octane table or high octane and flex fuel table...

Sorry to bring this back from the dead. Did you ever fix this issue? I'm having the same issue with the snake eater throttle body on my 2015 chevy SS. I even tried to just turn the codes off to drive...

update:
flashed the car with the 3.7 beta, did a KAM reset and the car instantly read the alcohol %. Drove to the gas station maybe a mile away filled it up and by the time i left it was already...

In for answers too! Maybe it'll help me with my it doesn't read any %.

I have no idea either. I thought maybe there was a table i couldnt see on 3.6 but with the beta it seems the same still.

I have the beta, I'll try to flash it with that and see if it works then.

What verison of hpt are you using? I dont even have a flex tab with 3.6

hmm. I guess ill change my afr tables around and see if that helps. Right now the car is just on a straight e85 tune.

update
filled the car up from half to full with e. Let it idle for a few minutes then went and drove for 40 miles l. I logged the whole drive and still 0% e. I never wenr WOT kept rpms between...