Search:

Your probably right. I believe we have remedied out problem with the TUTD on a 2018 L83/6L80E swap from a pickup we put into a 55 Bel Air by using Mr. Dalton Edwards information when running a truck...

+1 more for wanting to know how or what happened. I'm dealing with this issue currently.

Following this tread.

Morning, Can anyone tell me where i can purchase a interface cable for this connection coming out of a 6l80E and if HPT will read it with the cable? I looked at the Texa Renault cable but don't think...

Hey Gents, I was wondering if there's anyone that might know off the top of their head if the MSD/Holley dual sync's hall effect sensors put out their own square wave signal or if it is switch from...

Thanks for the reply. I did the math for the watts to amps at 12v instead of 120v the inverter is half the size I need.

Vehicle is a 2008 Chevy 1500 5.3l 4x4 with alt volt control. Can someone explain to me how the serial request and voltage control step, delay, etc works?

Why - If an inverter is plugged into...

Well $#!) of course you will. LOL. I already bought the credits, changed a few things i knew would need changed and wrote once to it to see if it would and it did. The Serial is XP0628120E2B4. I...

its [email protected]. Thanks

Man having a file to compare would be great if you have one. The car has the SCT BA3000 MAF and 400lph in it already. The fuel pump is wired up direct to ign which i don't care for along with the...

The car was a 4.6l from saleen, the ecm was changed when the 5.0 stroker went in is my understanding. The owner doesn't really know much and has just a bunch of notes he wrote on paper about the...

Thanks for confirming. I figured it probably wouldn't.

I have a customer with a tri five that wants to put an L83 into it, the 4L80 won't fit without modifying the tunnel which he wants to avoid. He wants an auto in it. Will a 4L65 work behind it does...

When i return it to stock and then read with HP it comes back validate checksum failed and then failed to load. That's what i sent to support that they told me i needed to have reflashed with factory...

Yes i have it. It's a #3000 hand held programmer. Older model with 3 custom dyno tunes in it. Ran the car with all 3 different tunes and same problems with them all as far as tuning goes. The owner...

LOL, right!!! I was freak'n out a little. No the starter wasn't running and nothing seemed out of place. I pulled the keys out of the ign, hit the brake pedal and it kicked off high idle like it...

Sorry for the late reply been adding onto the shop and working crazy hours. I'll have to double check but pretty sure it's the latest version. I see the info under the tune details tab and it looks...

Sorry for the late reply been adding onto the shop and working crazy hours. I'll have to double check but pretty sure it's the latest version. I see the info under the tune details tab and it looks...

I've got a 2010 F350 6.4L with an SCT livewire + (set stock) & EGR/cooler delete along with blown head gaskets sitting in the parking lot waiting for repairs and at almost the stroke of midnight this...

Ajennings that is how the car was setup already. The tune that was put in with the sct tuner is to lean everywhere but WOT. I need to go in and fix the rest of it. When i open the tune in my HP there...

Car: 2003 Saleen Mustang, 26k miles, swapped 5.0L Ford Racing stroker block, custom cam, trick flow heads, Kook's exhaust with Magnaflow's, 39lb inj, Keene Belle SC, water intercooled, 5 speed,...

Did you get the pedal issue resolved? I'm having the exact same problem with an LT1 swap.

Yes, i dont have them in front of me, will tomorrow. I think the only one i had was p2138 until i hooked up the Speedo sensor. Haven't gone through and updated the info for it because i didn't think...

I'm sure i must be missing something. Here's the tune and a log. I have signals but no throttle, truck will start and idle but that's it. Any help would be great.

I did the write entire right off the get go. Had it running 2 days ago. New problem is the ecm isn't controlling the throttle body. Signal is good from both sensors in the pedal to the ecm and wiring...