Now I have an excuse to get a supercharger!!!!!!!!!!!!!! WOOOOOHOOOO!!!!
Type: Posts; User: 98_LS1
Now I have an excuse to get a supercharger!!!!!!!!!!!!!! WOOOOOHOOOO!!!!
foff, where is that posted? Is that 100% true? thanks
Just get a mechanical boost gauge, and put a T fitting in the vacuum/(now pressure) line.
Sounds like you disabled the DTC for 0101, 0102, or 0103 to setting 3(No Error Reported). You need to set it to Setting 2 (No MIL). Same thing happened to me. You can leave the MAF plugged in, just...
take the bulbs out of the dash cluster.
Well, here is the way I would do it.
In Edit>Speedometer>Speedometer you see a option for transaxle or FWD. Under that you see
Current New
Tire...
0 degrees of advance or absolute timing? Check for things that might be causing false knock. Most short throw shifters (M6) cause false knock if you don't make sure they are tightened with LOCK...
If it was me, I would make the car run in open loop. (Change through flashing a new cal with open loop disabled, not the Scanner Tool). I would also think this would be the best way to get your...
Disconnect your battery cable for 5 mins and rehook up. It should go back to the stock programming. This happened to me when my laptop locked up during a flash of the VCM.
Where did you hear this? Interesting, maybe that "3rd party" involved found a major bug/issue with 2.0? Is this true HPT?
Are you guys even going to be interested in the new Front Wheel Drive V8's that GM is coming out with? Impala SS 5.3L V8, looks just like a LS1/LS2. Mounted SIDEWAYS. Strange. Just wondering if this...
ping occurs from to much timing or too little octane, or your cooling system isn't up to par, which in turn, allows the cylinder heads to be too hot, causing detonation. try changing the fan temps to...
I would think, since it's a rebuilt VCM, then the ROM image is probably completely gone, and you could possibly do a ReWrite Entire VCM. I'm not an expert though.
Just copy all the tables you modified, shouldnt take that long..... you don't have to re-tune the thing.
Here's another idea. If you take your car to a shop to get something done to it, like a regular shop e.g. pep boys or meineke (I will never take my car to a shop, except for body work), you could...
If #7 runs lean, that means it is getting more air flow. Just port the other cylinder intake/exhaust ports, so they flow evenly. Or for more power, port them all! Make sure they are all the same :-)
high, i used 255
For 98-00 Vehicles, the Secondary Table is what the car runs off of when your in SD Mode (NO MAF). That's why you think it might be more responsive.
For the DTC (Check Engine Light Codes) Do not...
Well put Chris.
Business is business. These guys have to make a profit. If you guys that are complaining had a business where everyone was asking for free stuff, and almost made no profit, how...
When you had computers with Windows 98 and Windows XP came out, did you get a free upgrade?? I think not. Same thing. Deal with it.
Nobody Knows huh??
Is there going to be an exchange basis? As in, a discount if we exchange our existing cable (a la v1.6) for a USB version(v2.0)? Just glad to hear that 2.0 is coming out very soon, as it seems as you...
This question only applies in tuning with stock narrowband O2's.
How do you tune the higher MAP readings at higher RPM without going into Power Enrichment mode???
Could you disable PE and...
Will any updates for 98 users be included in v2.0? Will it ever be possible for an Enhanced SD or 2 Bar MAP for these vehicles? Just wondering. Thanks
Open up VCM Editor
On the top toolbar go to Edit > Engine > Click the Idle tab > Click on Target Idle Speed vs. ECT and adjust as you wish.