Search:

112788

After rescaling the maf and setting injectors for return style im still getting Spark Source= Torque control and Fuel source= OL TQ rec lean

112697

I?ll change the injector data for return style. What should the rescaled maf look like?

So the car starts and tries to run but hunts for a place to idle. Stft dump a ridiculous amount of fuel until the point it loads up on fuel. And spark goes to torque reduction. Vortech ysi, stock tb,...

I'll add those to the logs and get a log of it in the morning. Now how do I change the update date rates?
It's got to be something simple some where. E85 at 83% ethanol should definitely put spark...

Still staying rich in high rpms. I've adjusted the maf but I'm only hitting one cell and I don't think it's the right one. But I'm starting to get better spark numbers
100820

I'll make these changes and log the maf again as well as work on the driver demand tables and post my results. Thanks for you help!

Here's my log and matching tune from tonight. Looks like its still giong rich in high rpms which is about the same time spark drops off

100647
100648

Alrighty I should be able log the car tomorrow evening and Ill get good log with the current tune. Car is a 2011 with CJ intake, frpp mono blade and cai, longtube headers with catless xpipe, 52lbs...

Ok that makes sense. Actually the borderline spark tables in the log I attached aren't the ones I used for that log. At around 3800rpm in the actual file I used timing in the boarderline was 14*...

Is the area you highlighted the area out of wack?

Maybe I'm understanding things wrong then. So if timing advance is at say 23* and knock retard is saying -7* then spark is at 30*?

What in the world am I doing wrong? It closes the throttle body at around 6850rpm and will not add any spark no matter what I do. I think I've got the multipliers turned off. I also don't think I...

My car is a 2011 with ford racing cj cold air, mono blade, cj intake, let headers and 52lbs ford injectors on e85. I copied someone?s mag period table and with the clyair filter and anticipation the...

I know how the cams work and understand that part. My problem is following the cook book there?s parameters that the book is listing that?s not in the program. I?ve looked to see if it?s labeled as...

I found the info for the injectors but not the throttle body. The only throttle body listed is the mechanical

I have 2011 coyote mt82 car with a cj intake manifold, mono blade tb, ford racing cai, long tube headers, catless xpipe, 52lbs ford racing injectors, and return style fuel system on e85. I have the...