I'm looking at this thinking you have some work to do if you want everything to work correctly.
1. You need a 2 bar MAP sensor, minimum. I know from your message on tech you want to step up to 12...
Type: Posts; User: ChopperDoc
I'm looking at this thinking you have some work to do if you want everything to work correctly.
1. You need a 2 bar MAP sensor, minimum. I know from your message on tech you want to step up to 12...
It's been quite a while since a tune had me stumped, but here we are. I am tuning a customers 2010 SS Camaro LS3 and everything on the MAF air model is absolutely great almost everywhere. I have the...
I just noticed in your log, that the MAF is still reading airflow. It should say zero. Unplug it if necessary, unless it has the integrated IAT. If this is the tune file that was in the PCM when...
Okay, had a chance to look at your tune and scans. Are you using a rail type fuel pressure regulator? I know it's a swap, so have to ask. If you don't have a rail type fuel pressure regulator, then...
Don’t mess with the injectors if they are stock and on stock data. Knowing now that you have the dual VE tables of the early computers (non 0411) then 5FDP is absolutely right. In SD the computer...
I’m not on my laptop right now, but venturing to guess.... do you have the MAF disabled? Changing the VE won’t do a ton when using the blended model (aka both airmass models, MAF and VE). I’ll bet if...
Awesome. Just remember that when the IAT shifts around, the numbers can be off, as in they might match when you tune it, but they won’t the next day, etc.
The idle calculations are different from...
Awww, I was just going to refer to such a video... Looks like you found it. I’m really glad it helped you out either way.
Post a log of it running normal and then one of it running badly if you can.
I have an EOIT explained video, for Gen III... The actual amount you push it back is quite subjective, however seeing richer fuel numbers essentially indicates you and burning more efficiently. There...
Larger cams don’t tend to respond well to more fuel. It’s fairly common to have leaner readings at idle, especially if you have a lot of overlap. Since you have headers too, the delay to the O2’s is...
In the meantime, I'm gonna say a prayer for that 4.8.
You'll need the powaaaa for that, or some skinny old bald tires. Make sure all the TM is off, and of course, optimize the tune for more low end torque.
Another note for the "fireball mode" as...
What have I done? LOL
You can check into my videos as well. Goat Rope is good, but don't always take one approach at it. There are a lot of things to learn. Also, he doesn't do the forum thing as far as I know, so getting...
If you want it to crackle a lot, a few more things you can do in addition to power enrichment adjustments...
First, turn off DFCO (Decel Fuel Cutoff). That will stop PCM from cutting fuel when...
That's a pretty good summary of how to start 5FDP, short and sweet. I see you mentioned videos too... I made those to save keyboard time lol.
OP... videos you may find helpful are in my...
New video - Tune Scaling Part 2 of 3 - Engine Tables: https://youtu.be/-YSjrVIIH-U
Also posted the calculator on the first post here.
New video, beginning (finally) the 3 part series on scaling a tune. I started with the concept in order to broaden the application. Though this is a P01 (0411) walk through series, the concepts apply...
Sorry I am just seeing this post. It's been a while since I have checked back in here. That would of also of been my suggestion, as anytime you are not seeing all possible parameters, a repoll...
I would try tuning the MAF instead of the VE here... Or fail the MAF, tune VE, then tune MAF (with ALL fuel adders removed)... Which is the typical order for full calibration. You're running closed...
New video posted, Boost Tune Setup for gen III cars
Bumping this because it's easier then replying to a lot of people asking for tuning help with swaps, VE, cams, etc. More to come, eventually. Been busy lately, doing Ford stuff, and other things, but...
Check out my videos on tuning. Might help you navigate this a little better. Link is in my signature.
Under cranking spark, the max is 64 degrees. This means that the maximum amount of spark during any cycle under any event available in the hard code is 64. 720 + 64 happens to be 784. That's what I'm...