I've got one here and will be doing a fleet of them (adding speed limiters for insurance reasons). Can't even identify the ECU.
Andrew
Type: Posts; User: andrewzpsu
I've got one here and will be doing a fleet of them (adding speed limiters for insurance reasons). Can't even identify the ECU.
Andrew
Need to use the beta to scan properly. I was able to log the factory ECM with good success on the beta, but not with the production.
Does not work.
Bought a replacement TCM and while it will pull the data correctly from the stock TCM, it won't write the segment to the replacement TCM. Tried multiple times now with no success. Anyone running...
First off, car is my 2018 ZL1 A10.
I flashed a 4% speedo change with the beta, and my reverse camera is stuck on and my reverse lights do not work - it was not doing it before this particular...
UPDATE: Well I may have just been a little too anxious - and paranoid. I've long suspected some issues with the generated TCM file from HPT - still curious as to why we can't read the actual tune,...
Just confirmed with another ZL1 at the shop that has the TCU upgrade, that the dual mode is stuck in tour mode.
After swapping to the HP Tuners TCM, the CCM (module that controls the dual mode exhaust) is not functioning properly in my 2018 ZL1. It is reading that it is in performance mode 0 (tour) and will...
I have a 2016 C7 and a 2016 C7Z both with turbo and both running SD....
I'm about to hit max slots. Hoping that we'll get a year/model for the 2016+ cars shortly to help alleviate that.
The only GenV I have issue going SD is the 2017 ZL1 - goes into a limp mode the moment the MAF fails, and no matter how it is failed. I've been in contact with HPT, but nothing has come of it yet. ...
Hey gang,
We've been noticing no matter what settings I throw into the AC disable, that it won't disable at WOT. The only point at which the AC clutch disengages appears to be when I hit redline....
Wastegate duty cycle perhaps?
I run my 2016 Twin Turbo C7 (Non-Z06) in SD with up to 21 lbs without issue. Can't get cruise control to work, but everything else does.
Anyone running into this? I have all the Gen3 V8 Cars. Pulled the tune with the newest 3.6 and its asking me to license.
I sent an e-mail to support, but just curious if anyone else has come...
Just did the crank relearn on a 2008 Corvette. Wouldn't work on 2.24, or 3.4. Worked perfect on the new beta. I think the addition of the put your foot on the brake prompt has helped, not sure if...
Engine > Fuel > Cutoff, DFCO > Cutoff RPM vs. Gear - Normal
Post the tune and more info on the build
The 4 credits for 2017 vehicles, will that be dropped down to 2 credits eventually? If not, I'm curious what the reasoning is for the 4 credits?
Thanks!
So all 2017's are 4 credits now? Is that because we need to do additional steps by sending the file in (as I think I read earlier)? Will that be dropped back down to 2 credits in the future?
Haha I downloaded it earlier today and couldn't find any release notes. Great Job!
Anyone got a successfully modded 2010 SHO version they would share? I've been trying everything and I am either missing it, or its just not there. Thanks!
Does anyone have any suggestions about the 2010 SHO? The computers are different and it appears I'm missing tons of parameters.
Attached is what I believe to be my stock 2010 file, but I bought...
Hopefully something for the 2010 SHO. I read this entire thread and looking at mine I have almost none of the needed tables everyone is talking about.
No, I'm looking to disable the codes, which we don't have access to at the moment - or at least when I wrote this (haven't checked). They are the AFM exhaust valves to quiet the exhaust when the car...