delete
Type: Posts; User: HPF
delete
I tuned this cai many time on new +15 and the old 11-14,, multiply by 1.95 its close enough to see good short terms no other issue will happen
here
I multiplied maf period by 1.95,, no issue at all !!
same problem with with me,, procharge coyote stock throttle
yes I'm sure I tuned these several times on new and older coyotes
multiplie maf period by 1.95
I just figured out when i use the 3.7 beta I must read the pcm again to adjust , don't use the old file the pulled out by 3.6 and adjust them.
not likely you will face thats problem but its just...
3.7 beta full bugs, had many problem with it
Export error when i do e-motion
any suggesting?
ya nothing change when I enable it, there is 3 client raptor needs tune. all boosted I can't tune their car until I figure out this issue
same thing happen with this guy www.hptuners.com/forum/showthread.php?64898-Fuel-system-status-CL-Fault-Turbo-6-2-Raptor&highlight=raptor
on my first upload fail scanner seems like TPS issue but I...
the main issue is CL - Fault status
now the car run better than before but its take so long time to spray gas on engine at WOT almost 2 sec
any suggestion?
on scanner by special function
Hi guys
Weird problem i dealing with, its 2011 procharge raptor with 47 injector
when the gear P/N position doing WOT seems every thing OK OL enabled so fast
but when the car driving and doing...
its 168 KB, I tuned this before and run great, happy to hook u with TB tables
speed density only on all ford ecoboost engines
never had them on my coyote
yah guys 2 of my customers fits nitrous on their s550 GT's non of them work well I did every thing
call me crazy but i think all these problem cuz +15 new manifold we will install boss/m and will...
pm sent
didn't find knock cyl on scanner to know which cylinder knocking its cool thing if i know which cylinder
did you adjust driver demand?
hey
raise the "maximum torque" 1&2 to 800 lb ft and tell us if its gone after
one of the customer car has this issue I tried to solve it by hp but its keeping show this code, we tried by sct and its fixed!
I believe sct crank relearn and dtc clear its more dependability then...
yes i did that allready nothing change