do some pcm have better resolution if they don?t have flex fuel?
Type: Posts; User: DMC36W
do some pcm have better resolution if they don?t have flex fuel?
Also, I mentioned that to my tuner. He doesn?t like tuning them like that because errors can happen.
How do I find out if the 2006 van ecu that I have will work? Or I think I have one for a 2006 Sierra also. Is it a $100 gamble or is there some where I can find info? Thank you!!
Did you ever get this figured out? im dealing with the same issue, my last truck was a 2005 and could do 3bar this one is a 2007 and only 2 bar, I need that boooost!!
Ever hear anything on this? I have an 07 classic and dealing with the same issue
89369 this is from my old truck with DW 60lb
https://ls1tech.com/forums/pcm-diagnostics-tuning/1895552-siemens-deka-60lb-injector-data-fi114962-107962-a.html
Post #21 of injector sticky thread is deka 60s
I have a 2007 classic That can only do 2 bar, Is there any tricks to get a 3 bar OS into it? i downloaded 20 plus tunes and none have 3 bar or if they do they are not compatible OS numbers so segment...
883478834788348
Thanks guys! the injector data is from ID's website, maybe i did it wrong?
Hello and thanks for dropping in, 2007 classic silverado with borg s480 bosch 210's twin 340lph in tanks . The cam is the LJMS stage 1 twin turbo cam, specs are 222/231 .602/.598 112+4. most of that...
Now the application locks up again before it can even load my tune. :(
Numerous times I tried going to Help, Resync Interface with nothing to come of it, tried it again just now and it did its thing and magic happened and the powers that be let it all start working, now...
Hello every one, So as the title states I just did the lastest update and now my application key isnt working. support had me do a few things ( uninstall all HP programs, download again, send...
After driving an logging ill change my VE table and multiply by percent, drive again and then ill be like way way off the next way? do I not have something turned off? I also keep taking 10percent...
I'll double check on the injectors but I'm pretty sure they are 100lbs at 58psi and my fuel pressure is at ~60, I added 10,20,and 30 percent of fuel in the VE in the area it was idling and I noticed...
7376173762
Car starts and runs ok, full lean on my wideband has seems that the lean conditions make it rev slow? seems like it kinda misfires at idle, 1998 bmw 328i 5.3 bored to 5.7 with camaro...
7367473675
So far this is the best idle and revving set up ive had with this build my wideband is showing full lean and im pretty positive the b1s1,b2s1 are wired right , flat 4 style plug...
Cruise control. The APPS is the same as the truck according to the part numbers I've found, you are correct in the tac module and I really appreciate the comments back! I'll steal my buddies tac...
this is the same computer the corvette used from what I understand and those were DBW? i had a 2003 blue green PCM and switched the dbw column to "1" and it would not work at all then i switched to...
Blue green harness with 896 red blue PCM running DBW, car starts, idles (poorly) I changed the O2 wiring per LT1swap website instructions, 02's stuck at full rich, it could just be that rich( havent...
73554, GUYS!!!!! it runs, now to weed out the other bs73556
2 bar map yes, idk how my ve table did that as I did not and it wont let me compare with my stock tune in the VE, also from what I read the 896 computer was used in the vettes too and it does control...
This car has twin 450 pumps, 5.3 block with camaro pistons 709 heads, 100lb injectors ls6 intake, IDK what else will help you guys with more knowledge then me. Fuel pressue is around 60, would...
Jinx, Im in the same boat as you so I was happy to see your post, 5FDP, ill bring it down, I have trailers and head to the mpls manheim almost weekly