Search:

Type: Posts; User: KalCorp

Search: Search took 0.00 seconds.

  1. Going to take sometime to install the BAP in the...

    Going to take sometime to install the BAP in the trunk where it defaulted to go.

    Did little work in the trunk. Hope there is room lol

    Yes it more of show car then a racing one.
    140446
  2. Replies
    2
    Views
    792

    Just working on my own car. Wanted to learn this...

    Just working on my own car. Wanted to learn this tune stuff to maintain it. Almost as fun as building it :-)

    Looks like I am stuck on the fuel part for now. Waiting for a BAP to go into my...
  3. One event was coming up for Christmas drive but i...

    One event was coming up for Christmas drive but i can skip that if needed. But again if i put back tune to what i had for years it should be ok.
    So next big event I want to be ready for is in...
  4. Got the AEM 30-0334 - (AEM X-SERIES OBDII...

    Got the AEM 30-0334 - (AEM X-SERIES OBDII WIDEBAND AFR GAUGE KIT) on order. should have in about 2 days.
    Hope that is the right one.

    I might put the tune back to what it was before i started...
  5. Updated to Deatschwerks Injectors. Still have...

    Updated to Deatschwerks Injectors.
    Still have Fuel issues over 5k RPM. Need to get BAP or new fuel pump.
    Wideband is up and i think its working. Most of time it matches guage. Its a glowshift...
  6. The FIC data did look to high. Going to test out...

    The FIC data did look to high. Going to test out Deatschwerks one today. Thanks!
  7. I will try :pray: Also was told i had FAST...

    I will try :pray:


    Also was told i had FAST 85lb injectors. Last cleaning shows them about 90lb/h.
    Couple of people here said to use FIC 850 data. Others have said Deatsch Werks...
  8. Replies
    2
    Views
    792

    Full Tune Checkup process and flow?

    Is there a Full Tune Checkup and process flow anywhere? just the HPtuner part.

    If starting on a new car, what are the things to check by priority?

    I would think it would start with these and...
  9. Thanks getting there. jsut got hardware for...

    Thanks getting there. jsut got hardware for widewand for HPtuners. and learning when to look at first and then next.
  10. OK made these changes and i think the Fuel PSI...

    OK made these changes and i think the Fuel PSI issue is resolved. But i will check again. using standalone mode does not look like it gets as much data spampling then when using laptop?
    ...
  11. Okay, I was able to obtain some ZL1 tunes and...

    Okay, I was able to obtain some ZL1 tunes and also those for FSCM to review.

    It seems that just installing a ZL1 pump is only part of the solution. I plan to adjust my SS pump fuel and FSCM pump...
  12. I just reviewed the Data for the injectors that...

    I just reviewed the Data for the injectors that poeple said to do since mine looked stock.

    140243 <--- Yes its in the damn little pic you got to click on lol

    Its defently not stock But not has...
  13. Its been like this for over 5 years and never had...

    Its been like this for over 5 years and never had any issues just driving around and haveing fun. I dont race it. But now that i know its not right i will fix it.

    A Boost a Pumps was the next...
  14. Fuel pressure still has issues and can't keep up....

    Fuel pressure still has issues and can't keep up. I'm planning to change to 15v, but I was told that's the maximum for this setup. Should I just get a new pump? Is it really needed? It's not like I...
  15. For what I can see, the injectors are about what...

    For what I can see, the injectors are about what I need. Now, tuning settings are a different thing and the next step.

    INJ Size #/hr x #INJ's / [NA:.50 FI:.65] x INJ DC .80 = Crank HP

    (85...
  16. I didnt get a credit for FSCM yet. Didnt know if...

    I didnt get a credit for FSCM yet. Didnt know if i needed to change anything in that. looks like i might need to change something in that so i will get that and add to the tune.
    Also got the Data...
  17. How would i get the FIC data for 850 decapped LS3...

    How would i get the FIC data for 850 decapped LS3 injectors ?



    Generator output on my car will set targeted generator output voltage between 13.9–15.5 V, depending on the battery state of...
  18. Before i make any changes to the Injector...

    Before i make any changes to the Injector settings. I will do another log now that Fuel PSI looks more stable.


    And from what i can see my flow rate was been chagned from stock when TT where...
  19. Info from web said this is how you do it on the...

    Info from web said this is how you do it on the Camaro i have. So far its working alot better. PSI is so much more than before.



    understand, next thing i am going to look into. But no longer...
  20. Just a FYI i did make some changes after i...

    Just a FYI i did make some changes after i posted this.

    System General Fuel System Volt Min 12.5 to 14

    A scan shows that Fuel Pressure (SAE) is better but not 100%
    Now if better injectors...
  21. Forgot i had a friend clean the injectors 2 years...

    Forgot i had a friend clean the injectors 2 years ago.

    This was them and report of data. not all the data but only what i got for now.

    maybe i should up the volts for pump from 12 to 15 :-)
    ...
  22. Thanks for all the input! I can only go by...

    Thanks for all the input!

    I can only go by what I was told when the twin turbos were fabricated years ago. Most likely, I was given incorrect information, and cheaper parts were used than what was...
  23. Tune Review: 2012 SS Camaro with Twin Turbos

    Hello all!

    I have a 2012 2SS/RS convertible Camaro A6 with Twin Turbos and just got my MPVi3, starting to learn what it can do.

    The car has been tuned twice that I know of. The first time was...
Results 1 to 23 of 24