hi bud many thanks are these table for a 130mm throttle body on a 2017 mustang regards
Type: Posts; User: SHMUSTANG
hi bud many thanks are these table for a 130mm throttle body on a 2017 mustang regards
im in the same position with a 130mm throttle body from kenne bell. when i asked for setting for the throttle body sadly they tried to tell me they had changed other things in the tune so i didnt...
look at your trans based set point the P/N it is at 1 rpm it should be 850 the same as the drive set point
hi can anyone help with this please my mustang starts and runs fine when warm but when its cold it wont start unless i put the gas pedal to the floor i have hopefully managed to attach the tune file...
normally if you have two files open and you make changes the colour changes so either you or the owner of the vehicle has made changes.
i have been reading that the 2024 gt mustang s650 will be locked to certain tuners. does anyone at hp tuners have any further info on this please and will hp tuners be getting access to the pcm in...
many thanks thats what i thought myself
many thanks for your help here is the tune thanks
can someone please advice if the GPF'S fitted to the EU s550 ford mustang can be deleted using HP tuners. many thanks
many thanks for the reply keith the credits have come through now.
regards
mike
i have recently bought 2 credits for my mpvi1 and as yet the new application key has not been sent through which unusual as they normally are emailed straight away.
can someone advise please.
many...
you can buy from steeda two types of cold air intake one with a tune the other without a tune. why would they supply something that is not need. as already stated calibrate the maf yourself
hi sorry it has taken me this long to reply i have been very busy at work. many thanks for any help you can give
many thanks i have been doing that but just cant get it right
at start up the idle is not stable and when data logging the idle adaptive STIT it is in high figures
can someone please help i bought a stage 2 kit for my 2005 ford mustang gt and the idle air flow tables and mulitipier tables are the same as the stage one and obviously with the larger throttle body...
HI guys im having the same issue with the p061C code what harm can it do if i disable this and effect will it have on the tune many thanks
can someone tell me please if i use the original pcm can i hook up hp tuners and switch off the auto tansmission will it funtion with the manual transmission many thanks
many thanks and i do know that but i cant read or write a file to the car anymore
hi guys
can anyone help please
i have changed a 2008 ford mustang auto to a manual for a customer and the pats system appears to have locked me out.
under advice from a ford tech in...
yes i have identified the pcm to the vin as i could change things in the tune file. when i installed the new engine harness that is when the problems started
many thanks the only reason i changed the pcm as i was told by a tech at ford i would need to change the pcm and the harness, i look through the file and noticed that i could switch the auto off....
many thanks for your reply i will check the battery and sure hope this is the issue
i have changed a 2008 roush supercharged mustang from automatic to manual mechanically it is sound but have an issue with the tune. i have changed the pcm and purchased a new engine harness. as the...
i ran brisk plugs in my supercharged s197 and they separated inside the ceramic very disappointed as they were suggested by the supplier of the supercharger.