this shows the ve tuning on gen 3 hemi. https://youtu.be/G7QGHuAYy48
Type: Posts; User: chri_mar
this shows the ve tuning on gen 3 hemi. https://youtu.be/G7QGHuAYy48
Come to find out they are a edelbrock 46lb injectors and can't seem to find out any data from them. Not sure what company manufactures them.
I believe they are 42 lb injectors that came with the system but not positive I would have to dig around to find out for sure.
This car was tuned again once I swapped everything over to this car. No new tuning since I added smaller pulley and forged bottom end. Same shop and same tuner did both cars.
This setup was on an 06 originally, dyno tuned and ran for 2 yrs. Then swapped to my current 5.7 and this year put in forged bottom end bored .020.
It was dyno tuned again after the swap into this...
Cometic 6.1 gaskets. No change with sensed map enabled either, still the cruise effect and full rich on decel. Starting to wonder if it might be a bypass issue. It seems to work as it's designed...
Actually forgot about that. I will do some more playing around with it tomorrow. This has persisted over both cars I have run this blower on, super happy with the power it puts out and thankfully I...
My mistake when writing the post, I had been reading so many of your posts lately and for some reason never caught it when I typed the post out. Sorry for the confusion, fixed now.
Was busy this week but had a chance to try this out for a short bit. The issue still exists with these changes, little pull near the start of this log and again full rich afr as well as the cruise...
2 bar that comes with the system. And yes played with those to no avail, made other weird things happen.
I ran a new log and will include changes made in the tune to date. We have played with airflow tables and most changes made things worse. In the latest log you can see right at the end of the log the...
No real difference after making the change, car continues to act like the cruise is on for a bit after decel. Almost feels like it's not coming out of boost but the gauge shows it is. Car runs like a...
I have been having an ongoing issue with my car not coming back to normal under deceleration. Running an edelbrock supercharger at 9lbs boost on a forged 5.7 with big valve heads and high lift cam....
as far as the dash lights I don't think there is much you can do as it disables the abs and esp as well as cruise control. There was a no esp mod that involved adding a toggle switch to one of the...
You need to do a cam crank resync. Just went through this with my 5.7 earlier this spring.
nothing modified by me, don't believe the tuner touched anything there either.
9960999609
Yes I had to change the gear ratio after writing backup.
Thanks I think I was able to fix the issue. after reading the tcm file again and comparing with my backup. Shift points were back to 5600 and rear gear was set back to 2.82, no wonder the limp mode....
Sorry to hijack your thread but I did hit the initialize egs53 button yesterday on mine. Now will hit limp mode very easily. Can hpt be used to write the file back to the mtcm or do I have to send...