Not sure if you fixed this, was just looking over your log and file.
Type: Posts; User: [email protected]
Not sure if you fixed this, was just looking over your log and file.
2013 to 2017 ATS 2.0l Cam table difference.
will not get good results if you copy and paste all of them but...
if you adjust the WOT base tables up some. might get what your looking for.
remember...
Leave VT alone.
dial in fueling all will follow
$$$
Ghost cam=improper tune..
What I have noticed is the vehicles modules hibernate after x time.
i just push start button to turn vehicle acc back on quickly when it takes longer than 1min 30 secs like a trans flash ( without...
make use you don't tap into the boost circuit hoses for a boost reference line from the turbo compressor.
keep them as short as possible.
not sure if this is the case.
https://forum.hptuners.com/showthread.php?25338-ETC-area-scalar
Engine/ System/ General/ Diag System Boost Voltage change to 14.5v. start there. remember much more and you will lose volume to secondary system.
should get you around 65psi at WOT.
Also you can...
I have searched high and low and very well could have missed this info.
VCM editor V. 4.4.4 using ECM/ECU E39a ( vehicle: 2013 Cadillac ATS 2.0l T RWD AUTO ) has not updated with this option, I have...