Search:

Type: Posts; User: MakesBadDecisions

Page 1 of 8 1 2 3 4

Search: Search took 0.00 seconds.

  1. The 30-0310 works with pro-link like a champ....

    The 30-0310 works with pro-link like a champ. Solder CAN H and CAN L wires together and grab the correct channel in the scanner and you are ready.
  2. The squirrel gets a nut for the day. Well said...

    The squirrel gets a nut for the day. Well said sir.
  3. I am glad to see its not an isolated thing, I...

    I am glad to see its not an isolated thing, I knew it wasn't but reading this made me laugh and mad at the same time. Flat rate breeds complacency and greed. I learned some valuable lessons from that...
  4. Replies
    22
    Views
    4,181

    Also, Wanted to warn you, that shift schedule...

    Also,
    Wanted to warn you, that shift schedule does have some fairly aggressive zero pedal downshifts when coming down from highway speeds to lower speeds. The 6-5, 5-4, 4-3 shifts will happen around...
  5. Replies
    22
    Views
    4,181

    Option 1 Save that channels list to your...

    Option 1
    Save that channels list to your User/Documents/HP Tuners/Channel Configs folder.
    Then open the VCM scanner and then load channels list, it will open an folder window. Then select the...
  6. Replies
    22
    Views
    4,181

    If the boys are building the intake I will have...

    If the boys are building the intake I will have them bead roll and lip to the inside just inside the edge, approx the width of the material, then they bead roll to the outside just a little further...
  7. Replies
    22
    Views
    4,181

    You lucky dog, have fun. My wife is itching to...

    You lucky dog, have fun. My wife is itching to leave town and SW Montana is just getting nice enough to get the toys out, she will have to wait just a bit longer. Do what you can when you can and no...
  8. Replies
    22
    Views
    4,181

    Ok good, just want to make sure we are comparing...

    Ok good, just want to make sure we are comparing apples to apples. I had a customer once that was comparing an old ass F1 to his Ferrari and wanted me to make the F1 drive like the Ferrari, not...
  9. Replies
    22
    Views
    4,181

    Here is a schedule to try based on the last file...

    Here is a schedule to try based on the last file you put in the forum.

    Get a log of this driving and attached to your reply on how this feels.
  10. Replies
    22
    Views
    4,181

    The dealership will more than likely not touch...

    The dealership will more than likely not touch it, ours wont touch anything that isn't stock and they then send them all to me.

    Question and not to sound rude or mean. Have you driven a LT4 car or...
  11. Replies
    22
    Views
    4,181

    The drop down for throttle type sets the shape...

    The drop down for throttle type sets the shape and spread of the shifts. You can right click on the table and open a 2d graph, open the up shift and down shifts, then change the throttle types and...
  12. Replies
    22
    Views
    4,181

    You will need to make changes to the tune file to...

    You will need to make changes to the tune file to correct the speed within the ECM/TCM. Using the gear/tire wizard in the software will be your starting point. Once your scanner speed is within a...
  13. Replies
    22
    Views
    4,181

    Have you verified the ECM/TCM are outputting the...

    Have you verified the ECM/TCM are outputting the correct speed? Does your car really have a 2.41 rear gear and 26.05 tall tire?

    Bluecat works great as a starting point. I have found that they...
  14. Not today men in black named E, P and A

    Not today men in black named E, P and A
  15. Dr. Mike The 30-0310 is our number one installed...

    Dr. Mike
    The 30-0310 is our number one installed WBO2 for our boosted builds. With the current Pro-link capabilities it has only made sense to install the 30-0310 and prolink for easy logging and...
  16. save the .xml file to the This PC/Documents/HP...

    save the .xml file to the This PC/Documents/HP Tuners/VCM Scanner/Channel Configs folder.
  17. Diagnose and repair the code P0442 - Evaporative...

    Diagnose and repair the code P0442 - Evaporative Emission System Leak Detected (small leak) (Current)

    You are not logging close enough to see a full picture. Load this channels list up and get a...
  18. Can you post a log of just key on and engine off?

    Can you post a log of just key on and engine off?
  19. Double check to make sure 12v, usually a Red wire...

    Double check to make sure 12v, usually a Red wire from PSI, to the ECM is present during ignition, cranking and back to ignition during the movement of the key. Number one reason for start issues...
  20. Is your torque convertor bolted to the flex...

    Is your torque convertor bolted to the flex plate? Be there more than once.
  21. Replies
    2
    Views
    1,315

    We ended up using a Bowler t56 harness and used...

    We ended up using a Bowler t56 harness and used that VSS out into the ECM which gave us speedo, there was other issues going on with intermittent comms, random other electical issues and...
  22. Replies
    2
    Views
    800

    Thanks ayashiko, much appreciated.

    Thanks ayashiko, much appreciated.
  23. Replies
    2
    Views
    800

    TRD file Verification needed

    I have an employee with an "alleged" dealer installed and flashed TRD Tacoma.
    Can anyone verify if the file attached is indeed a true TRD file?

    Thank you in advance.
  24. Replies
    8
    Views
    2,541

    Thanks for more info. This is a log and...

    Thanks for more info. This is a log and screenshot of the first WOT pull i made on the car while on the dyno and with the tune that was in the car as it arrived. With the low side moving around so...
  25. Replies
    8
    Views
    2,541

    I will get one coming to try. I assume those...

    I will get one coming to try. I assume those check valves near the HPFP are different enough that a regular check valve would not work. I see LPE has a high flow version. If this does fix it I will...
Results 1 to 25 of 194
Page 1 of 8 1 2 3 4