Thank You. I don't sell anything on E-Bay. That is kind of dirty for them to use my info.
Jeff
Type: Posts; User: Lextech
Thank You. I don't sell anything on E-Bay. That is kind of dirty for them to use my info.
Jeff
That is my file that I specifically asked NOT to be hosted or posted or given out. What gives you the right to post my work to any forum? You are also wrong about the files being the same. I...
You are describing the "Trans Range Switch" The wires and PCM setting you are describing have nothing to do with the engine starting in any gear. That is a "Neutral Safety Switch" issue.
Jeff
Where are you located? You should really have your location in your sig. There might be someone close to you that could help and have no idea where you are.
Jeff
I don't own HPT yet---So, I can't post it in that format. I can post it in .tun, .cal, .bin I also have not tested it in a PCM but it opens fine in EFILive and Tunercat. The one you posted is...
Dave,
Do you have the calibration in .tun or .bin that you can send me. Or--Will HPTuners open a .bin? If so, I can send you a stock 2003 Vette 12221588 OS w/4L80.
PM me if interested.
Jeff
2 posts and Australasian ?????
PM me your name and e-mail address and I will send you the file.
Jeff
You're right. I also own EFILive and forgot that parameter was in there.
Jeff
Tunercat.
I'm not sure what B26 and B66 are. On the PCM C1 is the Blue and C2 is the Red Connector. It appears that you have Bank 1 and Bank 2 sensor wiring switched. When the engine is cold it is in Open Loop...
No, Not that I know of. I never have.
Jeff
Go into "System" > "System Options" and set the Alt F and Alt L to "0" then delete any Alt Codes in the Diagnostic section.
Jeff
The 09354896 is the service number---not the serial number. The 4896 PCM will control a single or dual electric fan setup. The PCM outputs a Negative signal to the relay/relays.
Jeff
Thank You, I got it back.
Jeff
Somehow I lost the desktop icon for the tune tool. I don't know what I did or how I did it. Can someone help me to get it back.
Jeff
I can flash an extra PCM with Tunercat. Let me see if I can find someone around me that can pull it in HPT.
Jeff
Bill, I will send it to you shortly. I don't have it in HPT format. I have it in Tunercat and EFILive. I HAVE NEVER used it but, I believe it to be legit. It would be great if someone could...
I am not the guy who converted it. I have had it for several years, but have never had occasion to use it. If I recall correctly it was done by someone in Australia. I can flash this tune, I can read...
I have a 2004 GTO 4L80e tune---But not in HPTuners format. I have it in Tunercat and EFIlive.
Jeff
You could definitely do that. You would need to change the Green plastics on one of the 80 pin PCM connectors to Red plastics. I think you would also need to give the O2 heater circuit a ground...
You could use the 12586243 (2004) or the 12589462 (2005) or the 12602801 (2007) PCMs. They have the IAC drivers for DBC. I can't seem to find a listing for a 2006 DBC PCM.
Jeff
Hhmmm, I just tried to open the .bin I just posted and can't get it to work. I have that tune in .cal and .tun (Tunercat and EFILive) but can't post either one of those formats on this forum. I...
Here you go.
Jeff
The 04 GTO is a 1mb calibration. The 02 is a 512kb calibration. They do not interchange.
Jeff