There sure is a LOT more to tuning this Dodge stuff than tuning the early GM pcms.
Type: Posts; User: wkdivr
There sure is a LOT more to tuning this Dodge stuff than tuning the early GM pcms.
Yes. Scroll down thru the GM, Ford sections to the Dodge section.
look at the Dodge Tuning section. Lots of info there, although the Dodge system is very different, and very confusing.
The Tuning School just put out a short video on this subject. Looks to be a little different way to do it, but it is on a Hellcat Charger, so it might help.
:banghead: HUH!!!!!!!!!!!!!!!!!!!!!!!!!!???????????????????? :shrug:
I'm curious as to what parameters the VCM uses to switch between the high vs low octane tables. I'm starting to tune for meth, and most of the manufactures have some sort of extra to buy to act as a...
I have breather tubes going into a catch can. The problem was a small hole in the dipstick tube. I'll get back to tuning, eventually!
Thanks! It's running good enough to at least take it home, and run around to get some break in time on the shortblock. Not going to anything radical till I get this thing broken in. I'm chasing a...
Here's one of the latest. Didn't get a log, my laptop fell off the console, and I lost the latest log.
Was sure hoping one of the more experienced tuners on this site might take a look, and tell me if I'm headed in the right direction.
Got it to idle a lot better by going back to factory idle, and startup settings.
How did this turn out? Any better?
Need some help with my tune for my new engine. Shortblock 366 ci (6.0L with cleanup hone); Stock length RPM rods; forged flat top Probe pistons, approx. 10.8-1 with .052 head gaskets; L92 heads cut...
:banghead: I'm also having a hard time finding help/ideas on tuning these engines. If your I5 is basiclly the same as the Colorado's, look in the tune repository for the few tunes that have some mods...
I'm trying to find out anything about tuning the I5 3.5L inline 5. Can anybody suggest any other forums, or places to obtail some knowledge, or ideas? Thanks
Operating System: Windows XP
Microsoft .NET: 1.1.4322.2032
VCM Suite Product: VCM Editor 2.1.18.0
I think this is what you are looking for, right.
6444
6445
It did it for me with these files
Number 10 is where I get the message. I highlight it, and right click, and the error comes up before it even shows "Paste special/multiply"
Ok, let me try this again. Somehow....all my posts got mixed up, and it was hard for you guys to figure out what the heck I'm doing.
I'm trying to get my tune in line by doing a basic SD log of...
I just completely unloaded, and reloaded HP Tuners. I'll report back in a few days after I redo my logs.
I highlited the LT histogram, hit "copy", then highlited my VE table and did "Paste Special" to copy it into, then I get the message.
6402
6403
Here's the log, and the current tune
Hope this helps
Ver 2.1.18.0
I'll try to get more info
Anybody know anything about this? I'm trying to do a basic sd tune my truck by doing the "copy/paste Special" My LT's into my ve table, I get this message.
see the end of this message for...
Now, all my messages are backwards!!! I'm haunted!