I think im heading in the right direction, bumped the IAT and ECT spark advance up some seemed to help some
Type: Posts; User: 20116.0swap
I think im heading in the right direction, bumped the IAT and ECT spark advance up some seemed to help some
I did read the trans just not at the same time, PE didn't feel any different with it coming in early. truck seemed to respond the best running maf.
im pissing into the wind currently (no wideband) I think its just time to pick one up. I was asking to see if maybe there was something I could do with out it for the time being. from the reading ive...
how much can I safely add?
Of course I didn't log Cylinder airmass this time, but if I go into main spark low octane and add some timing into that high load low rpm area, how much is safe to add?
still pulling timing when I stab the throttle, my tune and short log are attached
I cant find a recent one that's short enough to post, what tables need to be changed ive looked at burst knock but didn't see which ones or how far to change them
Im trying to get rid of that lag from a stand still and stab the throttle. I have the Opening rate at 100%, still wont doesn't feel responsive. When I watch the scanner the only thing I see is the...
sounds good thanks for the heads up and info!
STFT look good the LTFT look better in the positive 8-10 range, compared to positive 15-19. still getting knock retard if I quick burp the throttle while driving
well I managed to get the VVE loaded on the truck, logged some was still lean. I stuffed 5% at it made a little difference, just went another 5% gonna log and see what happens. hopefully get a...
I feel like ive tried to change some of the VVE Stuff and the truck wont start after the write
I Did check for leaks about a week ago didn't find anything sprayed everything no changes
Just south of Mankato
My brother also replaced his wore out 5.3 with a 6.0,at the same time. He got the PCM with his motor tho, all I did with HPT was swap everything over from one to another and some TM changes. Is it...
the truck ran on the 5.3 tune for a week or so until I bought HPT, so I took everything from the 2010 file off the repository
I swapped a 2011 chevy 6.0 L96 VVT FLEX in to my 2011 GMC 1500, I didn't get the L96 ecm. I cant find one in the repository, closest I found was a 2010 L96 VVT FLEX. im getting knock at tip in and my...