Search:

May be a little till Im able to give this a go. I was riding my motorcycle yesterday to work with my laptop and interfaces in my bag. It decided to blow open at 80+mph and left my belongings all over...

I dont have a modified bin, only HPT file with user defined parameters and my XDF?s I?ve been working on. I have PCMflash and WinOLS, that?s how I was able to get a map pack made for my specific car

I?ve only ever seen tps hit 85%. Engine torque does seem low, however I?ve tried everything between downscaling and upscaling torque and aircharge tables.

Hey all,

I'm going to start pulling my hair out, after reading and referencing the FR for Simos8.5 repeatedly, I still cannot seem to get the bypass valve to close completely on my 207mm 3.0t....

Apologize for the slow work, life has been a little insane lately. Just uploaded a fairly large update on the 4G/4H side.

Does HPT ever plan on growing support for Yamaha powersports vehicles? More so specifically motorcycles like the R3, R6, R7, R1 etc? Or MT-03, 07, 09, 10?

I'm willing to make my R3 and R7 guinea...

I'd be interested in the 2022 Challenger if you have any stock reads from those

Once you have credits and have "Unlocked" that ecu, you can write infinitely to that specific VIN

Good deal! Might be worthwhile!

It should be applied directly to your account, you'll need to resync your interface.

I've used PCM Flash with Module 57, along with a Tactrix Openport and was able to get the read.

Good morning, I'm battling an issue I would imagine with torque scaling on my A8, P0068 - MAF/MAP Correlation

Any tips on resolving this? I thought I finally got torque scaling on this ECU down...

Good point!

Here is the Drive link:

https://drive.google.com/drive/folders/1IvgNa44J3kx-iW_hkzMWvzBVXbb_4ldL?usp=drive_link

Whoops! Typo hahaha

To give back to the forum and this platform, I have decided I am going to start a community run xdf patchlist. I dont expect everyone to hop on with this so progress may be slow on my end but I will...

Shit, seems like another bot got leaked through

Happy Holidays!

@Elaw here is 7k for you139977

Weird, 0005 is the highest version i can update to.

Thats awesome. Are you on revision 0005 too?

Those two ECU's may seem "Identical" when looking at them from a name point of view, however the Software ID's are different, the best thing I would recommend is open a ticket with HPT and keep up on...

@TheDrill as promised: https://drive.google.com/file/d/1c1kh4P5mxO69jLdWCzKX3-JKhiOWvfeP/view?usp=drive_link

Looking at it a bit further, it appears that my 4H bin would be the same as the 4G bin...

I?ll probably do most of the editing on winols, then every so often utilize his subscription. Thanks for all the help!

A friend of mine does have winOLS, so I could utilize that. Time isn?t too much of an issue but money on the other hand? Lol

I appreciate you Drill! I respect your work on this platform.

Edit: The base offset was a character off, here is the updated one.

139820